INPUT voltage says 30V DC and I just pulled the spec sheet and it takes the same power supply as the 900 SM like Ken said.
On Tue, Jan 10, 2017 at 4:21 PM, Ken Hohhof <[email protected]> wrote: > This is a PTP, not PMP? So same HW as the 900 MHz SM? I don't think that > will run on 48V, I think the max is 30. Although I have not used the PTP > version and could be mistaken. > > > -----Original Message----- > From: [email protected] > [mailto:[email protected]] On Behalf Of Nick Bright > Sent: Tuesday, January 10, 2017 3:08 PM > To: [email protected] > Subject: [Cambium-users] SyncInjector with PTP450i > > Greetings, > > I opened a ticket with PacketFlux but haven't received a response yet. > We had to leave the site in failure, unfortunately. > > At a customer location (contracting work for them, not my network) we were > installing a 2nd PTP450i 900Mhz unit for the clients' building to building > connections, and eventually there will be a third unit. > > To sync the network, we purchased a PacketFlux SyncInjector 10/100 (without > sync pipe), using a 48v power supply purchased from PacketFlux. > > The PTP450i units use 802.3at power, but do also work on Cambium POE (+30v > 7/8, -4/5). > > When connecting the PTP450i to the SyncInjector, the SyncInjector flashes > light codes that indicate "short or overload". > > I attempted to adjust the 4/5,7/8 to +/-,+/- matching the '450 > documentation, but the same short/overload error was reported. > > Basically, every configuration results in "short or overload" error > reported. > > Thoughts on this? > > -- > ----------------------------------------------- > - Nick Bright - > - Vice President of Technology - > - Valnet -=- We Connect You -=- - > - Tel 888-332-1616 x 315 / Fax 620-331-0789 - > - Web http://www.valnet.net/ - > ----------------------------------------------- > - Are your files safe? - > - Valnet Vault - Secure Cloud Backup - > - More information & 30 day free trial at - > - http://www.valnet.net/services/valnet-vault - > ----------------------------------------------- > > This email message and any attachments are intended solely for the use of > the addressees hereof. This message and any attachments may contain > information that is confidential, privileged and exempt from disclosure > under applicable law. If you are not the intended recipient of this > message, > you are prohibited from reading, disclosing, reproducing, distributing, > disseminating or otherwise using this transmission. If you have received > this message in error, please promptly notify the sender by reply E-mail > and > immediately delete this message from your system. > > _______________________________________________ > Cambium-users mailing list > [email protected] > http://lists.wispa.org/mailman/listinfo/cambium-users > > > _______________________________________________ > Cambium-users mailing list > [email protected] > http://lists.wispa.org/mailman/listinfo/cambium-users > -- Jesse Suchanek DoubleRadius Account Manager 704-927-6091 [email protected] www.doubleradius.com
_______________________________________________ Cambium-users mailing list [email protected] http://lists.wispa.org/mailman/listinfo/cambium-users
