Sync injectors can do 48v since rev i?  Been a while

Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373

On Jan 10, 2017 4:24 PM, "Jesse via Cambium-users" <[email protected]>
wrote:

> INPUT voltage says 30V DC and I just pulled the spec sheet and it takes
> the same power supply as the 900 SM like Ken said.  [image: Web Bug from
> http://t.sidekickopen69.com/e1t/o/5/f18dQhb0S7ks8dDMPbW2n0x6l2B9gXrN7sKj6v4LGBMVd0Gfx4XXF10MQZqWqQFLCHW5YNdJW1k1H6H0?si=6220812130582528&pi=2fc74fd3-c3e9-42ca-cabb-a0a0ed863136]
>
> On Tue, Jan 10, 2017 at 4:21 PM, Ken Hohhof <[email protected]> wrote:
>
>> This is a PTP, not PMP?  So same HW as the 900 MHz SM?  I don't think that
>> will run on 48V, I think the max is 30.  Although I have not used the PTP
>> version and could be mistaken.
>>
>>
>> -----Original Message-----
>> From: [email protected]
>> [mailto:[email protected]] On Behalf Of Nick Bright
>> Sent: Tuesday, January 10, 2017 3:08 PM
>> To: [email protected]
>> Subject: [Cambium-users] SyncInjector with PTP450i
>>
>> Greetings,
>>
>> I opened a ticket with PacketFlux but haven't received a response yet.
>> We had to leave the site in failure, unfortunately.
>>
>> At a customer location (contracting work for them, not my network) we were
>> installing a 2nd PTP450i 900Mhz unit for the clients' building to building
>> connections, and eventually there will be a third unit.
>>
>> To sync the network, we purchased a PacketFlux SyncInjector 10/100
>> (without
>> sync pipe), using a 48v power supply purchased from PacketFlux.
>>
>> The PTP450i units use 802.3at power, but do also work on Cambium POE (+30v
>> 7/8, -4/5).
>>
>> When connecting the PTP450i to the SyncInjector, the SyncInjector flashes
>> light codes that indicate "short or overload".
>>
>> I attempted to adjust the 4/5,7/8 to +/-,+/- matching the '450
>> documentation, but the same short/overload error was reported.
>>
>> Basically, every configuration results in "short or overload" error
>> reported.
>>
>> Thoughts on this?
>>
>> --
>> -----------------------------------------------
>> -  Nick Bright                                -
>> -  Vice President of Technology               -
>> -  Valnet -=- We Connect You -=-              -
>> -  Tel 888-332-1616 x 315 <(888)%20332-1616> / Fax 620-331-0789
>> <(620)%20331-0789>  -
>> -  Web http://www.valnet.net/                 -
>> -----------------------------------------------
>> - Are your files safe?                        -
>> - Valnet Vault - Secure Cloud Backup          -
>> - More information & 30 day free trial at     -
>> - http://www.valnet.net/services/valnet-vault -
>> -----------------------------------------------
>>
>> This email message and any attachments are intended solely for the use of
>> the addressees hereof. This message and any attachments may contain
>> information that is confidential, privileged and exempt from disclosure
>> under applicable law. If you are not the intended recipient of this
>> message,
>> you are prohibited from reading, disclosing, reproducing, distributing,
>> disseminating or otherwise using this transmission. If you have received
>> this message in error, please promptly notify the sender by reply E-mail
>> and
>> immediately delete this message from your system.
>>
>> _______________________________________________
>> Cambium-users mailing list
>> [email protected]
>> http://lists.wispa.org/mailman/listinfo/cambium-users
>>
>>
>> _______________________________________________
>> Cambium-users mailing list
>> [email protected]
>> http://lists.wispa.org/mailman/listinfo/cambium-users
>>
>
>
>
> --
>
> Jesse Suchanek
>
> DoubleRadius
>
> Account Manager
>
> 704-927-6091 <(704)%20927-6091>
>
> [email protected]
>
> www.doubleradius.com
>
>
>
>
>
>
>
>
> _______________________________________________
> Cambium-users mailing list
> [email protected]
> http://lists.wispa.org/mailman/listinfo/cambium-users
>
>
_______________________________________________
Cambium-users mailing list
[email protected]
http://lists.wispa.org/mailman/listinfo/cambium-users

Reply via email to