In a message dated 08/13/2001 16:30:18, you wrote:
<<Does anyone have the
exterior diminsions of an 14X17 film holder?>>
According to the 1988 ANSI Standard (PH3.108-1988 I think, the 8? is clogged
on my copy and could be a 6 or 3):
Height =19.563" minimum
Width = 15.938"-16.000"
Thickness =0.686" maximum
Depth to septum (T) = 0.320" - 0.016"
The far edge of the raised ledge that fits into the slot on the camera back
is19.288" maximum from the end of the holder where one loads the film. It
should be 0.061" +/- 0.015" high.
The bottom flap (F) is 1.043" maximum.
Joe
_______________________________________________
Cameramakers mailing list
[EMAIL PROTECTED]
http://rmp.opusis.com/mailman/listinfo/cameramakers
