Dear Sandy,
Recently I sent a message to the list about film holders, but as I had some
problems with my internet provider, I don't know if anyone answered me and I
missed the message. Anyway, the reason of the message was that I'm very
interested on good plans for large wood film holders. I'd like to know how
to construct them as I need some of special format. Here where I live
(Bahia, Brazil) view cameras are an unusual tool - you can imagine what to
odd format film holders. Even in brazilian big cities its very difficult to
find any film holders but the standard 4x5s. Do you have any ideas where I
could find good drawings and specifications that I could adapt to any format
? Thank you very much for any help.
Ricardo Wildberger Lisboa.
----- Original Message -----
From: Sandy King <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Monday, August 13, 2001 4:17 PM
Subject: RE: [Cameramakers] 14X17 film holder
> I wanted to add that even though there are ANSI specifications for
> 14X17 holders many cameras of this size were built before the
> specifications were established so it is important even here to
> verify that the dimensions of the holders and camera back match. It
> is often possible to modify the back to accept holders but sometimes
> this can be quite difficult.
>
> Anyone interested in 14X17 holders should contact me off-list as I
> have a couple for sale (made to non-ANSI specifications for a very
> old pre-ANSI standard camera).
>
> Sandy King
>
>
>
>
>
>
>
>
>
>
> >John Sparks wrote:
> >
> >
> >
> >
> >
> >
> >>There are ansi standards for 4x5, 5x7, 8x10, probably 11x14 and maybe a
few
> >>others (probably 2x3 and 3x4).
> >
> >For holders over 8X10" in size there were/are ANSI standard for
> >11X14 and 14X17.
> >
> >
> >>However, the banquet sizes were never
> >>standardized. Each camera maker made film holders of their own design
and
> >>specifications or used particular holders made by someone else.
> >
> >
> >This is true even today, as cameras are often made/adapted to fit
> >specific cameras and/or backs. One will observe that for the banquet
> >cameras of the paste significant differences in actual dimensions of
> >holders exist even among the same brand. If you take measurements
> >from any 10 Korona 7X17 or 12X20 holders, for example, at least 2-3
> >will be different from the others in one or more important dimension.
> >
> >Sandy King
> >
> >>Some
> >>builders make different cameras to fit holders from different sources so
> >>even "the same" cameras would require different holders to work
correctly.
> >>If you want to build a camera to take some odd size, you probably want
to
> >>find a source of holders (or design and build your own) before building
the
> >>back. Make sure any holders you buy have the same dimensions.
> >>
> >>John Sparks
> >>
> >>-----Original Message-----
> >>From: [EMAIL PROTECTED]
> >>[mailto:[EMAIL PROTECTED]]On Behalf Of Joe Portale
> >>Sent: Monday, August 13, 2001 3:29 PM
> >>To: [EMAIL PROTECTED]
> >>Subject: Re: [Cameramakers] 14X17 film holder
> >>
> >>
> >>I can provide these numbers for 4x5, 5x7, 8x10 and 11x14. Give me a
little
> >>bit and I'll do that this evening. While we are at it, why not setup
the
> >>table for the whole gamut? Say 2X5, 5x7, 4X10, 7X17, 8x10, 11X14, 14x17,
> >>12X20, 16X20 and 20x24.
> >>
> >>I think a table of rear box sizes would be helpful. In my research, it
seems
> >>that most rear boxes are 13% to 17% larger that the film size. An
example
> >>would be 12 inch rear for an 8X10 in film.
> >>
> >>Joe Portale
> >>Tucson, AZ.
> >>
> >>
> >>----- Original Message -----
> >>From: "J. Wayde Allen" <[EMAIL PROTECTED]>
> >>To: <[EMAIL PROTECTED]>
> >>Sent: Monday, August 13, 2001 1:57 PM
> >>Subject: Re: [Cameramakers] 14X17 film holder
> >>
> >>
> >> > On Mon, 13 Aug 2001, Joe Portale wrote:
> >> >
> >> > > I have recently came into the possession of an old copy camera. Iy
looks
> >> > > like this camera could be retrofitted into a really nifty 14X17
camera.
> >>The
> >> > > problem is that this camera does not have a back. Does anyone have
the
> >> > > exterior diminsions of an 14X17 film holder? These dimensions are
> >>imprtant
> >> > > if I am to fabricate a back. Thanks.
> >> >
> >> > Let's expand this just a tad. I'd like to put a table of standard
> >> > film holder dimensions (4x5, 5x7, 8x10, etc.) on the cameramakers web
> >> > page. Anyone have these handy? Any other tables of dimensions that
we
> >> > should have a common reference point for?
> >> >
> >> > - Wayde
> >> > ([EMAIL PROTECTED])
> >> >
> >> > _______________________________________________
> >> > Cameramakers mailing list
> >> > [EMAIL PROTECTED]
> >> > http://rmp.opusis.com/mailman/listinfo/cameramakers
> >>
> >>_______________________________________________
> >>Cameramakers mailing list
> >>[EMAIL PROTECTED]
> >>http://rmp.opusis.com/mailman/listinfo/cameramakers
> >>
> >>_______________________________________________
> >>Cameramakers mailing list
> >>[EMAIL PROTECTED]
> >>http://rmp.opusis.com/mailman/listinfo/cameramakers
> >
> >
> >_______________________________________________
> >Cameramakers mailing list
> >[EMAIL PROTECTED]
> >http://rmp.opusis.com/mailman/listinfo/cameramakers
>
>
> _______________________________________________
> Cameramakers mailing list
> [EMAIL PROTECTED]
> http://rmp.opusis.com/mailman/listinfo/cameramakers
>
_______________________________________________
Cameramakers mailing list
[EMAIL PROTECTED]
http://rmp.opusis.com/mailman/listinfo/cameramakers
