Leonard, � Good advice.� I was definitely planning to get one �locally�, which means either I can go pick it up, or they can bring it to me.� It may involve some hours of driving, but that seems to be the way to do it.� � I have been considering the 4x5 enlarger conversion route, and that is still an option.� The real problem is that I don�t use anything smaller than the 8x10 for B&W, so I don�t have an enlarger at this moment.� To buy a 4x5 enlarger and then convert it seemed just as difficult as getting a copy camera, and a bit more limited in options due to the height limit of the enlarger.� That�s how I settled on the copy camera. � Anyone have a recommendation on the amount of output an 8x10 head should have?� What is the wattage of the Aristo heads?� How about a typical 8x10 head for a Durst, or Devere?� I think the incandescent heads run 1500 to 2000 watts.� That is equivalent to 500 to about 650 watts of fluorescent light. � Thanks, � ---Michael Mutmansky
_______________________________________________ Cameramakers mailing list [EMAIL PROTECTED] http://rmp.opusis.com/mailman/listinfo/cameramakers
