Ah yes, I've had that happen to me. Unfortunately the superslice block seems to disconnect itself when it gets changed because it has to reassign the port numbers to keep the outputs sensible. I'm not sure why it reconfigures itself like that . I haven't had it happen to me inside another library block, only in the top layer of my design. Glenn
On Mon, Oct 20, 2008 at 8:37 AM, John Ford <[email protected]> wrote: > > Hi John, > > That's strange, I am routinely using the GAVRT library with the > backported > > 7.1 libraries. I will upload a snapshot of the GAVRT library to the SVN > > under the caltech directory right now. What sort of failures are you > > seeing? > > When I opened the mdl, some connections from the output of a superslice to > a xilinx blue block inside a subsystem were not connected. I connected > them by hand, and all was well. It happened three times in a row when I > opened the mdl file. It's building OK (got past where it failed before, > at least) since I connected the wires by hand. > > John > > > > Glenn > > > > On Mon, Oct 20, 2008 at 8:05 AM, John Ford <[email protected]> wrote: > > > >> Hi Glen. I was wondering if your GAVRT library was compatible with the > >> backport stuff you did. I have a design that builds with the old > >> libraries that seems to fail with the backported libraries plus your > >> original gavrt library. I'll send the mdl file if you want to look at > >> it. > >> It's too big to send to the list. > >> > >> Thanks for any info. > >> > >> John > >> > >> > >> > >> > >> > >> > > > > >
