Hi Mitch, I also installed 10.1 by web download and don't remember having this problem. In my case I downloaded ISE, EDK and DSP_Tools as separate packages and installed them each individually.
Do you already have Matlab/Simulink installed? These need to be setup before you can run/configure System Generator. Maybe your installer is trying to locate Matlab? Just a shot in the dark. Good luck, Laura On Thu, Mar 26, 2009 at 11:37 AM, Jason Manley <[email protected]>wrote: > Our version of sysgen came with Xilinx DSP tools. You will also need the > servicepacks. > > If you don't come right, I can try'n post the install files, but they're > rather big (~300MB) and our 3rd world internet is slow! I think Henry might > be able to help you faster if you can't find a copy of DSP tools. > > Jason Manley > Digital Engineer > SKA-SA, KAT Pinelands office > > Unit 12, Lonsdale Building > Lonsdale Road > Pinelands > 7405 > South Africa > > Cell: +27 82 662 7726 > Work: +27 21 531 7282 > Fax: + 27 21 531 9761 > > > > > On 26 Mar 2009, at 17:26, Mitchell Bernard Mickaliger wrote: > > Hi all, >> >> I am trying to install the Xilinx 10.1 toolflow. The ISE and EDK install >> fine, but when I try to install the system generator, I get an error >> message: >> >> The following error was encountered during installation: >> 11:Archive could not be located.. >> Press Retry to try again, otherwise press Cancel to exit the installation. >> >> Has anyone run into this problem before? I have tried downloading the >> sysgen again, but to no avail. The sysgen I am trying to install is part >> of the ISE design suite installer package (as it was the only version of >> sysgen I could find on the Xilinx site). Could that be the problem? >> >> -- >> Mitch Mickaliger >> Physics Department >> West Virginia University >> >> > > >
