Hi Mandana Yes, things have definitely improved since the early Linux versions. I am now running Matlab R2008b and Xilinx 11.5 on RHEL5 Linux and am reasonably happy with it. Matlab still segfaults from time-to-time, but it's manageable. There are still a few quirks (eg Simulink doesn't have a taskbar under Linux, dragging blocks sometimes dissapear etc) but they're all minor.
10.1 under Windows is stable, but will not be used moving forward (ROACH-II will require a lot of memory for larger designs, more than any 32-bit windows can handle). CASPER is now recommending RHEL5 as the OS of choice for the 11.x toolflow, and will likely be the case for 12.x and onwards. For this reason, I recommend you switch to Linux. Also, if possible, I strongly recommend you try to install things with their defaults (standard locations, no symlinks or network drives etc). This makes it much easier to support and we can more easily help you track down any problems you might have. Jason On 22 May 2010 01:52, Mandana Amiri <[email protected]> wrote: > Hi, > > We are going to use the Roach board (arriving soon!) for a proof-of-concept > design. I am in the process of setting up the toolflow and I need to decide > between windows versus RHEL. I read the following thread dated mid-March: > > http://www.mail-archive.com/[email protected]/msg01328.html > > Has this recommendation changed since? > > Thanks, > Mandana > > > Jason Manley wrote: >> >> I too find RHEL a very frustrating OS to use on a day-to-day basis. >> But it seems the Xilinx tools rely on some of those ancient libraries >> that RedHat packages. We've had some success with installing newwer >> Debian-based distros, and then manually adding the older libraries >> (perl is the big annoyance). But this is far from reliable and not >> recommended. As Dan says, we've found some quirky behaviour where some >> designs compile and others do not. >> >> If you insist on running something other than RHEL (as I do), then I >> can suggest you get yourself a copy of the full RHEL5 root filesystem >> and do a chroot before starting matlab/xilinx tools. It works >> reliably, but is painful to setup (not to mention that it consumes >> ~20GB of diskspace). This is not something a Linux newbie should try >> and is not recommended for those who are not familiar with these tools >> and concepts. You can also do things like faking the hostname (using >> chname) and the ethernet adaptor's MAC (must be eth0; set up a null >> tap device) to ease licensing troubles when upgrading or moving your >> compile environment to a different hardware platform. In this way, as >> far as the toolflow is concerned, the system is RedHat (apart from the >> kernel, which is mostly the same). >> >> I mention this to illustrate that there are other toolflow >> possibilities. But please note that this is not a CASPER recommended >> configuration and we can not (and will not) offer support for anything >> other than a vanilla RHEL5 install. >> >> Jason >> >> On 21 May 2010 05:54, Dan Werthimer <[email protected]> wrote: >> >>> >>> hi bay, andy, >>> >>> i strongly recommend using Xilinx supported operating systems >>> (eg: RHEL5). >>> >>> we've encountered some very strange bugs with other >>> linux variants - these bugs don't appear like they might be operating >>> system >>> related, but when we switched over to RHEL5, the bugs vanished. >>> >>> also, xilinx will refuse to answer questions if you aren't using one of >>> the >>> operating systems they support. >>> >>> i'm hoping the bulk of the casper community will use RHEL5 or another >>> xilinx supported system so we can all help each other. >>> >>> our group has switched to RHEL5 and i recommend it to other groups. >>> >>> dan >>> >>> >>> >>> >>> >>> On 5/20/2010 6:39 PM, Andrew Lutomirski wrote: >>> >>>> >>>> On Thu, May 20, 2010 at 9:34 PM, John Ford<[email protected]> wrote: >>>> >>>> >>>>>> >>>>>> Hi Bay, >>>>>> >>>>>> We had to move to RHEL5 (64-bit ok) to get versions above 11.3 >>>>>> working. >>>>>> I've heard that CentOS works too. >>>>>> >>>>>> >>>>> >>>>> And you really need 64 bit... >>>>> >>>>> >>>> >>>> We're in the process of setting up a Fedora 13 system, since it's >>>> annoying to have packages as old as RHEL's. Has anyone had any >>>> trouble with that? >>>> >>>> (There's also RHEL6 Beta, but I haven't gotten that to install without >>>> crashing, so I don't think it's quite ready for prime time.) >>>> >>>> --Andy >>>> >>>> >>>> >>>>> >>>>> John >>>>> >>>>> >>>>> >>>>> >>>>>> >>>>>> Mark >>>>>> >>>>>> >>>>>> On Thu, May 20, 2010 at 3:49 PM, Bay E. Grabowski >>>>>> <[email protected]>wrote: >>>>>> >>>>>> >>>>>> >>>>>>> >>>>>>> We're setting up a new toolflow computer after Ubuntu stopped >>>>>>> working. >>>>>>> Should we be installing RHEL 64-bit install or 32-bit? The wiki >>>>>>> mentions >>>>>>> 64-bit in passing, but I remember there being some problems with >>>>>>> 64-bit >>>>>>> earlier... >>>>>>> >>>>>>> -- >>>>>>> Bay Grabowski >>>>>>> [email protected] >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>> >>>>>> >>>>> >>>>> >>>>> >>>> >>>> >>> >>> >> >> >> > > >
