Hi all, I got many times this error. It seems that is rather hard to understand where is the problem, I have solved by adding delays somewhere on the design.
Are we sure that disabling this check (if possible using simulink) do not affect the project behaviour? How we can track it on the design in order to fix the timing contraints? In the timing report there is no indication on which block do not meet timing constraints... Cheers, Andrea > Hi there,I got this message, > > To disable the PAR timing check: > > 1> Disable the "Treat timing closure failure as error" option from the > Project Options dialog in XPS. > > OR > > 2> Type following at the XPS prompt: > XPS% xset enable_par_timing_error 0 > > Therefore I tried : > > I've tried " xset enable_par_timing_error 0 " under the matlab terminal , > and it doesn't work . > I've run the bee_xps under matlab and , the flags doesn't allow us to > uncheck timing error. > I'm currently using centos 64bits. with matlab2009b. > > regards, > ----------------------------------------------------------- Andrea Mattana Istituto Nazionale di Astrofisica Istituto di RadioAstronomia Stazione di Medicina Via Fiorentina 3508/B I-40059 Medicina (BO) Tel +39-051-6965834 Fax +39-051-6965810
