Hi Miguel,
For 2, try opening a new model file and putting in the XSG_core_config
and System Generator blocks, pulling them from their libraries. Then
open up tut1 and copy everything except the XSG_core_config and the SG
blocks and paste it into your new model file. Save and ctrl-D. If
that
doesn't work, you may have to redraw tut1 from scratch.
Mark
On Tue, Apr 5, 2011 at 3:54 AM, ---> Miguel A. S. G <---
<[email protected] <mailto:[email protected]>> wrote:
Hi Mark,
Thank you for your quick reply. Following your instructions...
1.- It's solved.
2.- It's not solved. I mean, I swapped the blocks of tut1.mdl with
blocks from my library. Save the model, close matlab, open matlab
and same "bad links" appear.
3 and 4.- Im not at work now so.. tomorrow i will try it.
Thank you anyway!
Miguel.
*From:* Mark Wagner <mailto:[email protected]>
*Sent:* Monday, April 04, 2011 9:05 PM
*To:* [email protected] <mailto:[email protected]>
*Cc:* [email protected] <mailto:[email protected]>
*Subject:* Re: [casper] Roach: Getting Started Enviroment 2011
Hi Miguel,
Sorry you're having so much trouble.
1. This is just a warning you're getting and doesn't hav any
effect
on the functionality of the toolflow, but you can comment out:
Browser(2).Library = 'testbench_lib';
Browser(2).Name = 'Testbench Blockset';
in mlib_devel/gavrt_library/slblocks.m, and you should stop
getting
that warning.
2. I think this is because you are opening up the model file with
a
newer library than what it was originally created with. But I
think
you solved this already by deleting the block and pulling from the
library you're opening the model file with.
3. If you look at this posedge, I think it's not being loaded
correctly. If you try deleteing and replacing the posedge
(tut2/pkt_sim/posedge) like you did in 2, it should fix the
problem.
4. I'm not sure what the issue is here, but try ctrl-D, which will
update the design and propagate the data types and hopefully it
will
give a more telling error.
Best,
Mark
On Tue, Apr 5, 2011 at 1:43 AM, <[email protected]
<mailto:[email protected]>> wrote:
Hi Griffin,
Thank you so much!!
About the first option
centos 5.3 / Xilinx ISE 11.4 / Matlab 2009b
Are Casper Libraries compatibles with? I mean, don’t
are
they
build for Ise 10.1?
My problems? Ok let’s go step by step:
1) Each time I open simulink:
Warning: Could not find library ‘testbench_lib’ o
speciefied in
‘C:\codigos\mlib_devel\gavrt_library\slblocks.m’
2) The first time i open a model all the yellow blocks are
“bad
link†and matlab welcomes me with a lot of warnigs like:
“Warning: "tut1/counter_value" is a parameterized link.
To
view,
discard, or propagate the changes for this link,
use the "Link Options" menu item.â€Â
With the tutorial 2 I also get four warnings like,
“Warning: casper_library_misc.mdl, line 5905:
block_diagram
does
not have a parameter named 'BlockName'â€Â.
And others warning about a parameter "SID†(I can
remember a
discussion about SID in the casper list)
Anyway, then I pick up an element from BEE_XPS System Blockset
(i can see this library in the simulink library browser) , put
it in the model and the yellow blocks became ok.
3) When I tried to run ‘bee_xps’ with
‘tut2.mdl’ i get
the same
warnings plus the following error:
Error using ==> gen_xps_files at 199
Failed to find 'Misc/pulse_ext/posedge' in library
'casper_library' referenced by 'tut2/pkt_sim/posedge'.
4) With tutorial3 after “bee_xps†the thing are
getting
worse...
I received around fifty errors like (i only copy two of them
but
i have a .txt file if someone is interested in):
“Error using ==> gen_xps_files at 199
--> Error reported by S-function 'sysgen' in
'r_spec_2048_r105/Concat1':
An internal error occurred in the Xilinx Blockset Library.
Please report this error to Xilinx
(http://support.xilinx.com),
in as much detail as possible. You may also find immediate
help
in the Answers Database and other online resources at
http://support.xilinx.com.
Since it is possible that this internal error resulted from an
unhandled usage error in your design, we advise you to
carefully
check the usage of the block reporting the internal error. If
errors persist, we recommend that you restart MATLAB.â€Â
“--> Error in 'r_spec_2048_r105/sync_cnt':
Initialization
commands cannot be evaluated. MATLAB error message: Error
using
==> register_mask at 48
Error evaluating 'MoveFcn' callback of Xilinx Gateway Out
Block
block (mask)
'r_spec_2048_r105/sync_cnt/r_spec_2048_r105_sync_cnt_user_data_in'.
Error using ==> xlBlockMoveCallback at 53
Error reported by S-function 'sysgen' in
'r_spec_2048_r105/sync_cnt/r_spec_2048_r105_sync_cnt_user_data_in':
An internal error occurred in the Xilinx Blockset Library.
Please report this error to Xilinx
(http://support.xilinx.com),
in as much detail as possible. You may also find immediate
help
in the Answers Database and other online resources at
http://support.xilinx.com.
Since it is possible that this internal error resulted from an
unhandled usage error in your design, we advise you to
carefully
check the usage of the block reporting the internal error. If
errors persist, we recommend that you restart MATLAB.â€Â
I download the models from Casper web so i assume they will be
ok. This is the reason why i was wondering if i have the
correct
setup. I readed
http://www.xilinx.com/support/answers/17966.htm
and chose, Windows XP 32 bits, Matlab R2008a, ISE 10.1.3.
Theoretically... it should be valid but........
Miguel.
**
**
*From:* Griffin Foster <mailto:[email protected]>
*Sent:* Monday, April 04, 2011 6:38 PM
*To:* [email protected] <mailto:[email protected]>
*Cc:* [email protected]
<mailto:[email protected]>
*Subject:* Re: [casper] Roach: Getting Started Enviroment 2011
Hi Miguel,
We are using a windows and linux setup which is:
centos 5.3 / Xilinx ISE 11.4 / Matlab 2009b
windows XP / Xilinx ISE 10.1 / Matlab 2007b
the main git repo is at:
git://casper.berkeley.edu/mlib_devel.git
<http://casper.berkeley.edu/mlib_devel.git>
What kind of errors are you getting?
-Griff
On Mon, Apr 4, 2011 at 4:45 PM, <[email protected]
<mailto:[email protected]>> wrote:
Hi all,
My name is Miguel. I started to work with Casper
enviroment
a couple of months ago. I’m trying to comunicate
severals
Roach through a swicth.
I readed on the web that the best choice was: Windows XP,
System Generator 10.1 and Matlab 2008a (as Xilinxs said,
it
was compatible) but i started to get (a lot of) warnings
and
errors.
I would like to be sure, because I still have a terrible
mess with Linux/Windows, Matlab, System generator versions
supported to work with Casper libraries, the respository
(isn’t a link to git repository on the web, is it?)
and
i’m
driving insane.
It would be very helpfull if someone could resume one/two
different options:
1) Which O.S must I install?
2) Which System Generator Version must i install?
3) Which Matlab version must i use?
I mean, could anyone tell me for example :
“RED HAT 5, System Genereator 12.6, Matlab
2011†or
“ubuntu 9.7, System Generator 10.1, Matlab
2009aâ€Â
they both work ok.
Thanks.
Miguel.
