hi tom, if you are using kat-ADC's, you'll need to change the adc yellow block in the tutorial.
dan On Fri, Mar 2, 2012 at 3:57 PM, Kuiper, Thomas (3266) <[email protected]>wrote: > I think that's it! I after replacing the file system, I made the > necessary changes from memory and general sys admin knowledge. I think I > forgot to move the bof file. I'll let you know when I have a network > connection again. > > Thanks > > Tom > > Sent from my iPhone > > On Mar 2, 2012, at 3:25 PM, "David MacMahon" <[email protected]> > wrote: > > > Hi, Tom, > > > > That's definitely not the most helpful error message. Here are a couple > of things to check: Does the bof file have execute permissions? Is it in > the right directory? > > > > Dave > > > > On Mar 2, 2012, at 3:09 PM, Kuiper, Thomas (3266) wrote: > > > >> After the challenges I shared with you and more that I didn't, I've > reached a reasonably satisfactory state. I say that because I think I'm > finally at the hardware/firmware level. The hardware: KatADC in Z-Doc 0 of > a ROACH-1. 800 MHz at 0 dBm going in to clk. The firmware: from the > tutorial. Likewise the Python script. Latest kernel, filesystem and > borphserver2 from wiki/LatestVersions. Can anyone suggest what may be > wrong and what I should try next? Is there a script for verifying the > clock, for instance? > >> > >> Thanks and regards, > >> > >> Tom > >> > >> kuiper@vega:/opt/CASPER/tutorials_devel/workshop_2010/roach_tut3_wideband_spec$ > sudo ./spectrometer.py roach1 r_spec_2048_r105_2010_Jul_26_1205.bof > >> [sudo] password for kuiper: > >> Connecting to server roach1 on port 7147... ok > >> > >> ------------------------ > >> Programming FPGA with r_spec_2048_r105_2010_Jul_26_1205.bof... FAILURE > DETECTED. Log entries: > >> roach1: Starting thread Thread-1 > >> roach1: #version raw-0.1 > >> roach1: #build-state tcpborphserver-2.3398 > >> roach1: ?progdev r_spec_2048_r105_2010_Jul_26_1205.bof > >> > >> None > >> Traceback (most recent call last): > >> File "./spectrometer.py", line 143, in <module> > >> exit_fail() > >> File "./spectrometer.py", line 110, in <module> > >> fpga.progdev(bitstream) > >> File "/usr/local/lib/python2.6/dist-packages/corr/katcp_wrapper.py", > line 110, in progdev > >> reply, informs = self._request("progdev", boffile) > >> File "/usr/local/lib/python2.6/dist-packages/corr/katcp_wrapper.py", > line 61, in _request > >> reply, informs = self.blocking_request(request,keepalive=True) > >> File > "/usr/local/lib/python2.6/dist-packages/katcp-0.3.4-py2.6.egg/katcp/client.py", > line 623, in blocking_request > >> (msg.name, timeout)) > >> RuntimeError: Request progdev timed out after 10 seconds. > >> > > > >
