These should help ROACH 2 Mechanical Drawing: https://github.com/ska-sa/roach2_chassis_design/blob/R2_rev_6/ROACH_2_CAD/roach_2_hardware.pdf
ROACH 2 CAD: https://github.com/ska-sa/roach2_chassis_design/blob/R2_rev_6/ROACH_2_CAD/roach2_asm.stp ROACH 2 PCB: https://github.com/ska-sa/roach2_hardware Regards On Mon, Aug 27, 2012 at 9:08 PM, Jason Ray <[email protected]> wrote: > Vaughan, > > Thanks for the drawing! That's what we were looking for. > > If you could make the cad model available, that would be great! > > Thanks again, > Jason > > > > At 09:21 AM 8/24/2012, Vaughan Moss wrote: > > Hi > > I have prepared this drawing, hope it helps. It is based on a CAD model. > If you would like that it can be made available. > > Regards > > > On 23 August 2012 17:30, Jason Manley <[email protected]> wrote: > Vaughan Moss (cc'd here) has these drawings. > https://github.com/ska-sa/roach2_chassis_design > > I can tell you that it only just fits in a 1U case, with about 1mm to > spare above the DRAM DIMM after it's mounted on standoffs. > > Jason > > On 23 Aug 2012, at 16:37, Jason Ray wrote: > > > All, > > > > Does anyone have a mechanical drawing of the roach 2 board? Mainly the > board dimensions and mounting hole locations. > > > > I'll also need to know the approximate overall height of the board > assembly with the tallest mezzanine board (CX4 or SFP+?) installed. > > > > Thanks in advance! > > Jason > > > > > > > > > -- > Vaughan Moss > DBE > SKA SA > 3rd Floor, The Park > Park Road > Pinelands > 7405 > South Africa > Tel: +27 (0)21 506 7363 > Fax: +27 (0)21 506 7375 > Email: [email protected] > Web: www.ska.ac.za > Content-Type: application/pdf; name="roach_2_hardware.pdf" > Content-Disposition: attachment; filename="roach_2_hardware.pdf" > X-Attachment-Id: f_h69b3zj20 > >
