Hi Katty, It seems there's a block not linking properly to your casper libraries. I'd suggest the first thing to try is just to delete the FFT blocks from your model and drop fresh ones back in from the CASPER library.
Cheers, Jack On 9 November 2012 20:54, katherine viviana cortes urbina < kattycort...@gmail.com> wrote: > Dear Casperites, > > I have a new problem when I compile the tut3: > > Warning: Tag 'DialogParameters' was not expected here: > casper_library_pfbs.mdl, line 6603. > > In gen_xps_files at 99 > In bee_xps>run_Callback at 154 > In bee_xps at 86 > ############################# > ## System Update ## > ############################# > Error using ==> gen_xps_files at 199 > Failed to find 'sync_delay_en' in library 'casper_library_delays' > referenced by > 'tut3/fft_wideband_real1/fft_biplex_real_4x0/bi_real_unscr_4x/reorder_even/sync_delay_en'. > Warning: P-file /opt/Xilinx/12.1/ISE_DS/ISE/sysgen/bin/lin64/xlgetparam.p > is older than M-file > /opt/Xilinx/12.1/ISE_DS/ISE/sysgen/bin/lin64/xlgetparam.m. > /opt/Xilinx/12.1/ISE_DS/ISE/sysgen/bin/lin64/xlgetparam.p may be obsolete > and may need to be regenerated. > Type "help pcode" for information about generating P-files from M-files. > > In shared_bram_mask at 52 > Warning: The model 'tut3' does not have continuous states, hence Simulink > is using the solver > 'VariableStepDiscrete' instead of solver 'ode45'. You can disable this > diagnostic by explicitly specifying a > discrete solver in the solver tab of the Configuration Parameters dialog, > or by setting the 'Automatic solver > parameter selection' diagnostic to 'none' in the Diagnostics tab of the > Configuration Parameters dialog > Warning: Output port 2 of > 'tut3/fft_wideband_real1/fft_biplex_real_4x0/bi_real_unscr_4x/reorder_even' > is not > connected. > Warning: Output port 1 of > 'tut3/fft_wideband_real1/fft_biplex_real_4x0/bi_real_unscr_4x/reorder_odd' > is not > connected. > Warning: Output port 2 of > 'tut3/fft_wideband_real1/fft_biplex_real_4x0/bi_real_unscr_4x/reorder_odd' > is not > connected. > Warning: Output port 1 of > 'tut3/fft_wideband_real1/fft_biplex_real_4x0/bi_real_unscr_4x/reorder_out' > is not > connected. > Warning: Output port 2 of > 'tut3/fft_wideband_real1/fft_biplex_real_4x0/bi_real_unscr_4x/reorder_out' > is not > connected. > Warning: Output port 4 of 'tut3/fft_wideband_real1/fft_direct' is not > connected. > Warning: Output port 5 of 'tut3/fft_wideband_real1/fft_direct' is not > connected. > Warning: Output port 4 of > 'tut3/fft_wideband_real1/fft_direct/butterfly2_1' is not connected. > Warning: Output port 2 of > 'tut3/fft_wideband_real1/fft_unscrambler/reorder' is not connected. > Warning: Output port 1 of 'tut3/pfb_fir_real/adder_1_2' is not connected. > Warning: Output port 1 of 'tut3/pfb_fir_real/adder_1_3' is not connected. > Warning: Output port 1 of 'tut3/pfb_fir_real/adder_1_4' is not connected. > Warning: Output port 2 of 'tut3/pfb_fir_real/pol1_in2_coeffs' is not > connected. > Warning: Output port 2 of 'tut3/pfb_fir_real/pol1_in3_coeffs' is not > connected. > Warning: Output port 2 of 'tut3/pfb_fir_real/pol1_in4_coeffs' is not > connected. > Warning: Inconsistent sample times. Sample time ([1, 0]) of signal driving > input port 1 of > 'tut3/adc/tut3_adc_user_dataq3' differs from the expected sample time ([0, > 0]) at this input port. > Warning: Inconsistent sample times. Sample time ([1, 0]) of signal driving > input port 1 of > 'tut3/adc/tut3_adc_user_dataq1' differs from the expected sample time ([0, > 0]) at this input port. > Warning: Inconsistent sample times. Sample time ([1, 0]) of signal driving > input port 1 of > 'tut3/adc/tut3_adc_user_dataq0' differs from the expected sample time ([0, > 0]) at this input port. > Warning: Inconsistent sample times. Sample time ([1, 0]) of signal driving > input port 1 of > 'tut3/adc/tut3_adc_user_datai3' differs from the expected sample time ([0, > 0]) at this input port. > Warning: Inconsistent sample times. Sample time ([1, 0]) of signal driving > input port 1 of > 'tut3/adc/tut3_adc_user_datai2' differs from the expected sample time ([0, > 0]) at this input port. > Warning: Inconsistent sample times. Sample time ([1, 0]) of signal driving > input port 1 of > 'tut3/adc/tut3_adc_user_datai0' differs from the expected sample time ([0, > 0]) at this input port. > Warning: Inconsistent sample times. Sample time ([1, 0]) of signal driving > input port 1 of > 'tut3/adc/tut3_adc_user_datai1' differs from the expected sample time ([0, > 0]) at this input port. > Warning: Inconsistent sample times. Sample time ([1, 0]) of signal driving > input port 1 of > 'tut3/adc/tut3_adc_user_dataq2' differs from the expected sample time ([0, > 0]) at this input port. > Warning: Inconsistent sample times. Sample time ([0.25, 0]) of signal > driving input port 1 of > 'tut3/adc/tut3_adc_user_data_valid' differs from the expected sample time > ([0, 0]) at this input port. > Warning: Inconsistent sample times. Sample time ([1, 0]) of signal driving > input port 1 of > 'tut3/adc/tut3_adc_user_sync3' differs from the expected sample time ([0, > 0]) at this input port. > Warning: Inconsistent sample times. Sample time ([1, 0]) of signal driving > input port 1 of > 'tut3/adc/tut3_adc_user_sync2' differs from the expected sample time ([0, > 0]) at this input port. > Warning: Inconsistent sample times. Sample time ([1, 0]) of signal driving > input port 1 of > 'tut3/adc/tut3_adc_user_sync1' differs from the expected sample time ([0, > 0]) at this input port. > Warning: Inconsistent sample times. Sample time ([1, 0]) of signal driving > input port 1 of > 'tut3/adc/tut3_adc_user_sync0' differs from the expected sample time ([0, > 0]) at this input port. > Warning: Error reported by S-function 'sysgen' in > > 'tut3/fft_wideband_real1/fft_biplex_real_4x0/biplex_core/fft_stage_10/butterfly_direct/twiddle_general_dsp48e/cmult/DSP48E_0': > A summary of Sysgen errors has been written to > /home/ROACH/Desktop/tut3_sysgen_error.log > > please see the attachment > > any idea? > > Cheers > > Katty >
