Hi Jack,
After to delete the FFT blocks from me model and drop fresh ones back in
from the CASPER library.
I add the following command in the matlab window:
xlAddSysgen(getenv('XILINX_DSP'))
the compilation of tutorials 1 and 3 this running
Cheers,
Katty
2012/11/9 Jack Hickish <[email protected]>
> Hi Katty,
>
> It seems there's a block not linking properly to your casper libraries.
> I'd suggest the first thing to try is just to delete the FFT blocks from
> your model and drop fresh ones back in from the CASPER library.
>
> Cheers,
> Jack
>
>
> On 9 November 2012 20:54, katherine viviana cortes urbina <
> [email protected]> wrote:
>
>> Dear Casperites,
>>
>> I have a new problem when I compile the tut3:
>>
>> Warning: Tag 'DialogParameters' was not expected here:
>> casper_library_pfbs.mdl, line 6603.
>> > In gen_xps_files at 99
>> In bee_xps>run_Callback at 154
>> In bee_xps at 86
>> #############################
>> ## System Update ##
>> #############################
>> Error using ==> gen_xps_files at 199
>> Failed to find 'sync_delay_en' in library 'casper_library_delays'
>> referenced by
>> 'tut3/fft_wideband_real1/fft_biplex_real_4x0/bi_real_unscr_4x/reorder_even/sync_delay_en'.
>> Warning: P-file /opt/Xilinx/12.1/ISE_DS/ISE/sysgen/bin/lin64/xlgetparam.p
>> is older than M-file
>> /opt/Xilinx/12.1/ISE_DS/ISE/sysgen/bin/lin64/xlgetparam.m.
>> /opt/Xilinx/12.1/ISE_DS/ISE/sysgen/bin/lin64/xlgetparam.p may be obsolete
>> and may need to be regenerated.
>> Type "help pcode" for information about generating P-files from M-files.
>> > In shared_bram_mask at 52
>> Warning: The model 'tut3' does not have continuous states, hence Simulink
>> is using the solver
>> 'VariableStepDiscrete' instead of solver 'ode45'. You can disable this
>> diagnostic by explicitly specifying a
>> discrete solver in the solver tab of the Configuration Parameters dialog,
>> or by setting the 'Automatic solver
>> parameter selection' diagnostic to 'none' in the Diagnostics tab of the
>> Configuration Parameters dialog
>> Warning: Output port 2 of
>> 'tut3/fft_wideband_real1/fft_biplex_real_4x0/bi_real_unscr_4x/reorder_even'
>> is not
>> connected.
>> Warning: Output port 1 of
>> 'tut3/fft_wideband_real1/fft_biplex_real_4x0/bi_real_unscr_4x/reorder_odd'
>> is not
>> connected.
>> Warning: Output port 2 of
>> 'tut3/fft_wideband_real1/fft_biplex_real_4x0/bi_real_unscr_4x/reorder_odd'
>> is not
>> connected.
>> Warning: Output port 1 of
>> 'tut3/fft_wideband_real1/fft_biplex_real_4x0/bi_real_unscr_4x/reorder_out'
>> is not
>> connected.
>> Warning: Output port 2 of
>> 'tut3/fft_wideband_real1/fft_biplex_real_4x0/bi_real_unscr_4x/reorder_out'
>> is not
>> connected.
>> Warning: Output port 4 of 'tut3/fft_wideband_real1/fft_direct' is not
>> connected.
>> Warning: Output port 5 of 'tut3/fft_wideband_real1/fft_direct' is not
>> connected.
>> Warning: Output port 4 of
>> 'tut3/fft_wideband_real1/fft_direct/butterfly2_1' is not connected.
>> Warning: Output port 2 of
>> 'tut3/fft_wideband_real1/fft_unscrambler/reorder' is not connected.
>> Warning: Output port 1 of 'tut3/pfb_fir_real/adder_1_2' is not connected.
>> Warning: Output port 1 of 'tut3/pfb_fir_real/adder_1_3' is not connected.
>> Warning: Output port 1 of 'tut3/pfb_fir_real/adder_1_4' is not connected.
>> Warning: Output port 2 of 'tut3/pfb_fir_real/pol1_in2_coeffs' is not
>> connected.
>> Warning: Output port 2 of 'tut3/pfb_fir_real/pol1_in3_coeffs' is not
>> connected.
>> Warning: Output port 2 of 'tut3/pfb_fir_real/pol1_in4_coeffs' is not
>> connected.
>> Warning: Inconsistent sample times. Sample time ([1, 0]) of signal
>> driving input port 1 of
>> 'tut3/adc/tut3_adc_user_dataq3' differs from the expected sample time
>> ([0, 0]) at this input port.
>> Warning: Inconsistent sample times. Sample time ([1, 0]) of signal
>> driving input port 1 of
>> 'tut3/adc/tut3_adc_user_dataq1' differs from the expected sample time
>> ([0, 0]) at this input port.
>> Warning: Inconsistent sample times. Sample time ([1, 0]) of signal
>> driving input port 1 of
>> 'tut3/adc/tut3_adc_user_dataq0' differs from the expected sample time
>> ([0, 0]) at this input port.
>> Warning: Inconsistent sample times. Sample time ([1, 0]) of signal
>> driving input port 1 of
>> 'tut3/adc/tut3_adc_user_datai3' differs from the expected sample time
>> ([0, 0]) at this input port.
>> Warning: Inconsistent sample times. Sample time ([1, 0]) of signal
>> driving input port 1 of
>> 'tut3/adc/tut3_adc_user_datai2' differs from the expected sample time
>> ([0, 0]) at this input port.
>> Warning: Inconsistent sample times. Sample time ([1, 0]) of signal
>> driving input port 1 of
>> 'tut3/adc/tut3_adc_user_datai0' differs from the expected sample time
>> ([0, 0]) at this input port.
>> Warning: Inconsistent sample times. Sample time ([1, 0]) of signal
>> driving input port 1 of
>> 'tut3/adc/tut3_adc_user_datai1' differs from the expected sample time
>> ([0, 0]) at this input port.
>> Warning: Inconsistent sample times. Sample time ([1, 0]) of signal
>> driving input port 1 of
>> 'tut3/adc/tut3_adc_user_dataq2' differs from the expected sample time
>> ([0, 0]) at this input port.
>> Warning: Inconsistent sample times. Sample time ([0.25, 0]) of signal
>> driving input port 1 of
>> 'tut3/adc/tut3_adc_user_data_valid' differs from the expected sample time
>> ([0, 0]) at this input port.
>> Warning: Inconsistent sample times. Sample time ([1, 0]) of signal
>> driving input port 1 of
>> 'tut3/adc/tut3_adc_user_sync3' differs from the expected sample time ([0,
>> 0]) at this input port.
>> Warning: Inconsistent sample times. Sample time ([1, 0]) of signal
>> driving input port 1 of
>> 'tut3/adc/tut3_adc_user_sync2' differs from the expected sample time ([0,
>> 0]) at this input port.
>> Warning: Inconsistent sample times. Sample time ([1, 0]) of signal
>> driving input port 1 of
>> 'tut3/adc/tut3_adc_user_sync1' differs from the expected sample time ([0,
>> 0]) at this input port.
>> Warning: Inconsistent sample times. Sample time ([1, 0]) of signal
>> driving input port 1 of
>> 'tut3/adc/tut3_adc_user_sync0' differs from the expected sample time ([0,
>> 0]) at this input port.
>> Warning: Error reported by S-function 'sysgen' in
>>
>> 'tut3/fft_wideband_real1/fft_biplex_real_4x0/biplex_core/fft_stage_10/butterfly_direct/twiddle_general_dsp48e/cmult/DSP48E_0':
>> A summary of Sysgen errors has been written to
>> /home/ROACH/Desktop/tut3_sysgen_error.log
>>
>> please see the attachment
>>
>> any idea?
>>
>> Cheers
>>
>> Katty
>>
>
>
