OK, the fact that the modprobe command showed nothing means that it succeeded, so try running "dmesg | grep -i ftdi" again.
Dave On Dec 6, 2012, at 11:20 AM, Nimish Sane wrote: > Hi Dave, > > All of these show nothing. > > I just checked and see that there is an LED near the FTDI USB port (named USB > OK) that is ON (Red) on the board. Do you know what is that suppose to > indicate? > > Thanks, > > Nimish > > On Thu, Dec 6, 2012 at 2:14 PM, David MacMahon <[email protected]> > wrote: > Hi, Nimish, > > What does "dmesg | grep -i ftdi" show? > > Does "lsmod | grep ftdi_sio" show anything? If not, try "modprobe ftdi_sio". > > Dave > > On Dec 6, 2012, at 10:53 AM, Nimish Sane wrote: > > > Hi Dave, > > > > I can see it as a usb device /dev/usbdev* (8 devices actually) but not as > > tty* that I can use. Does one need to install some drivers for this FTDI > > component? > > > > Thanks, > > > > Nimish > > > > On Thu, Dec 6, 2012 at 12:20 PM, David MacMahon <[email protected]> > > wrote: > > Hi, Nimish, > > > > I think you can find the information in the output of dmesg as (or after) > > you connect the USB cable. It might also be in /var/log/messages. > > > > Dave > > > > On Dec 6, 2012, at 9:04 AM, Nimish Sane wrote: > > > > > Hi Jason, > > > > > > This is regarding the FTDI part. I am using RHEL 5.8. We could not > > > identify the right device/port in /dev/ directory. Do we need to install > > > any drivers? > > > > > > I tried using the Linux driver they have here: > > > http://www.ftdichip.com/Drivers/VCP.htm However, I am not able to install > > > this driver. I was wondering if this is the right driver and has anyone > > > successfully installed it. > > > > > > In either case, could someone throw more light on how to identify the usb > > > device/serial port associated with this FTDI part on ROACH2 using RHEL? > > > > > > Thanks, > > > > > > Nimish > > > > > > On Wed, Dec 5, 2012 at 8:11 AM, Nimish Sane <[email protected]> wrote: > > > Hi Jason, > > > > > > Thank you so much for this information. I will report here if there > > > are any issues. Though we have not used KATCP previously, we are > > > familiarizing ourselves to it and plan to use it in future. This is > > > inline with the scheme you have described. I will try this out now. > > > > > > Thanks, > > > > > > Nimish > > > > > > On Dec 5, 2012, at 1:36 AM, Jason Manley <[email protected]> wrote: > > > > > > >> From our understanding usbboot is still not working and we have to use > > > >> mmcboot using SD cards. Is that correct? In either case, where can I > > > >> find the instructions and required files? > > > > > > > > Yeah, I don't actually think USB's ever going to work right as long as > > > > we stick with this PPC part... it's got issues with USB! Maybe we must > > > > look more closely at alternatives for ROACH3. > > > > > > > > But ROACH2 can now boot "soloboot" (boots off an onboard FLASH memory) > > > > and still offer a fully functional tcpborphserver3 interface > > > > out-of-the-box. This way, you don't have to fiddle with NFS booting, or > > > > preparing SD cards and worrying about filesystem corruption if you > > > > don't shutdown properly (soloboot filesystem mounts read only). You can > > > > now also upload your boffile from your control computer through KATCP, > > > > so no more rsyncing to get your bof files up there. > > > > > > > > Some notes: > > > > * You can get a command prompt by plugging a USB cable (type A-B) in > > > > the back and, courtesy of an FTDI part, you should get four serial > > > > ports. One of 'em (2 or 3, IIRC) will get you to the PPC. If you're > > > > using KATCP, you should never need to see a ROACH Linux prompt again. > > > > * An SSH server is not installed on soloboot. You can get a command > > > > prompt on the network via telnet, but you have to enable the telnet > > > > server (see /etc/rc.local). > > > > * DHCP is enabled by default, but you can assign a static IP address > > > > using the example in /etc/rc.local if you want. > > > > > > > > If you want all the Linux bells and whistles, you can still stick an SD > > > > card in there. You can use the same filesystem as your ROACH-1, but > > > > you'll have to modify it yourself to use a ROACH-2 compatible > > > > tcpborphserver. My suggestion would be to try'n use the soloboot option > > > > first (ie as it ships from digicom). > > > > > > > >> I guess I am pretty much confused on how to get started with ROACH2 > > > >> boards after sifting through the CASPER wiki, so I would appreciate > > > >> any help on how to get started with ROACH2 boards. > > > > > > > > You'll be one of the first CASPER users, so I'll be keen to hear how > > > > you get on. If you're familiar with ROACH-1 and are using the KATCP > > > > interface, I think you'll find it reasonably familiar and can probably > > > > just start using it. All your existing KATCP commands should be > > > > compatible. If you've been using your own Linux code on the PPC, then > > > > I'm afraid you're mostly on your own or at the mercy of the rest of the > > > > collaboration. While we've left support for alternative boot options in > > > > place on ROACH-2 (which is probably what you want to do if you want > > > > your own Linux filesystem/commands), SKA-SA will not be providing or > > > > supporting additional filesystems moving forward (mmcboot, usbboot > > > > etc). We're moving towards a model using something like soloboot where > > > > ROACH boards start looking like dumb appliances which makes maintenance > > > > much easier. KATCP is the only interface we can be sure will be > > > > supported in future so I'd suggest you aim to use that in your new > > > > designs if you can. > > > > > > > > Jason > > > > > > > > > > > > -- > > > Nimish Sane > > > > > > Center for Solar-Terrestrial Research > > > New Jersey Institute of Technology > > > University Heights > > > Newark, NJ 07102-1982 USA > > > Tel: (973) 642 4958 > > > Fax: (973) 596 3617 > > > [email protected] > > > > > > > > > > > > > -- > > Nimish Sane > > > > Center for Solar-Terrestrial Research > > New Jersey Institute of Technology > > University Heights > > Newark, NJ 07102-1982 USA > > Tel: (973) 642 4958 > > Fax: (973) 596 3617 > > [email protected] > > > > > > > -- > Nimish Sane > > Center for Solar-Terrestrial Research > New Jersey Institute of Technology > University Heights > Newark, NJ 07102-1982 USA > Tel: (973) 642 4958 > Fax: (973) 596 3617 > [email protected] >
