Hi Dave H., lsusb returns this: Bus 002 Device 021: ID 0403:6011 Future Technology Devices International, Ltd FT4232H Quad HS USB-UART/FIFO IC
I had seen this note earlier, and thought I don't need to do anything since product id was recognized fine. But, may be I need to something. Let me check. Thanks, Nimish On Thu, Dec 6, 2012 at 3:14 PM, David Hawkins <[email protected]> wrote: > Hi Nimish, > > > > Yes, I can see that FTID message when I run lsusb. > > And the output is what? > > If the FTDI product ID is not recognized by ftdi_sio, then > you may have to create a udev rule > > http://www.ftdichip.com/**Support/Documents/**TechnicalNotes/TN_101_** > Customising_FTDI_VID_PID_In_**Linux%28FT_000081%29.pdf<http://www.ftdichip.com/Support/Documents/TechnicalNotes/TN_101_Customising_FTDI_VID_PID_In_Linux%28FT_000081%29.pdf> > > I've attached a rules script that I created for an FT232H based > cable. You should be able to do something similar for whatever > device is on the ROACH2. > > Cheers, > Dave > -- Nimish Sane Center for Solar-Terrestrial Research New Jersey Institute of Technology University Heights Newark, NJ 07102-1982 USA Tel: (973) 642 4958 Fax: (973) 596 3617 [email protected]
