Hi Katty, Are you using the current version of casper-astro/mlib_devel.git library<https://github.com/casper-astro/mlib_devel>? If not, what version are you using? Would you mind doing a screen capture of your FFT parameter box (all tabs)? We'll check on it. If this is a bug in our current library then we definitely need to fix it as soon as possible...
Thanks, Hong On Thu, Dec 20, 2012 at 1:35 PM, Ryan Monroe <[email protected]>wrote: > I'll just chime in that I've seen this error before, which I solved by > switching to a different version of the library. I can't help with this > one, just wanted to say it's probably not operator error. > > --Ryan > > > > On 12/20/2012 01:24 PM, katherine viviana cortes urbina wrote: > > Hi Mark, > > > Today I change the fft in my design , I also open up the parameter boxes > of both and make sure that the parameters are the same, I delete the old > and replace it with the new, but I have the same error, > > Detected Linux OS > ############################# > ## System Update ## > ############################# > Error using ==> gen_xps_files at 199 > Error due to multiple causes. > > > Cheers > > katty > > 2012/12/19 Mark Wagner <[email protected]> > >> Hi Kathy, >> >> I think the design you opened up was built with an older version of the >> libraries. All you need to do is open up the simulink browser and pull >> that fft into your design, then open up the paramter boxes of both and make >> sure that the parameters are the same. After that, delete the old one and >> replace it with the new. >> >> Mark >> >> >> On Wed, Dec 19, 2012 at 5:14 PM, katherine viviana cortes urbina < >> [email protected]> wrote: >> >>> Hi mark, >>> >>> Where I get of newer versions of fft and pfb_fir? >>> >>> Cheers >>> >>> Katty >>> El 19/12/2012 19:10, "katherine viviana cortes urbina" < >>> [email protected]> escribió: >>> >>> Hi mark, >>>> >>>> Where I try of newer versions of fft and pfb_fir ? >>>> >>>> Cheers >>>> El 19/12/2012 18:52, "Mark Wagner" <[email protected]> >>>> escribió: >>>> >>>>> Hi Katty, >>>>> >>>>> I think it's possible you're using older versions of the fft and the >>>>> pfb_fir. Could you try to replacing those with the ones from the library >>>>> you have open (with the same parameter settings)? And then try ctrl-d? >>>>> >>>>> Mark >>>>> >>>>> >>>>> On Wed, Dec 19, 2012 at 4:32 PM, katherine viviana cortes urbina < >>>>> [email protected]> wrote: >>>>> >>>>>> Dear Casperites, >>>>>> >>>>>> I am design a Spectrometer of 1Ghz, I just be parameters in the >>>>>> existing blocks. I change the parameter 'Number of simultaneous inputs' >>>>>> set >>>>>> to 3. But when I compile design , I have the error: >>>>>> >>>>>> >>>>>> ############################# >>>>>> ## System Update ## >>>>>> ############################# >>>>>> Error using ==> gen_xps_files at 199 >>>>>> Error due to multiple causes. >>>>>> >>>>>> >>>>>> if I do ctrl + d , I see the attachments. >>>>>> >>>>>> >>>>>> Cheers >>>>>> >>>>>> >>>>>> Katty >>>>>> >>>>>> >>>>> >> > >
