Hi Ioana I have done 2 successful compiles: one with only a one_GbE yellow block and one with a one_GbE yellow block + ten_GbE.
Is it possible to send me your model file to compile? Regards Henno On Fri, Jan 11, 2013 at 5:47 AM, Ioana A Zelko <[email protected]> wrote: > Dear Casper Group, > > > We are trying to set up data transmission from the fpga through its 1gbe > ethernet port. > For this, we tried using the one_GbE block from the library, with its > default settings. > However, when we try to compile a small design that has basically just the > one_GbE with its required logic, > we get this error in the compilation stage: > > > > " > Writing NGC file "../system_gbe1_test_xsg_core_ > **config_wrapper.ngc" ... > Total REAL time to NGCBUILD completion: 4 sec > Total CPU time to NGCBUILD completion: 4 sec > > Writing NGCBUILD log file "../system_gbe1_test_xsg_core_** > config_wrapper.blc"... > > NGCBUILD done. > INFO:EDK:3509 - NCF files should not be modified as they will be > regenerated. > If any constraint needs to be overridden, this should be done by > modifying > the data/system.ucf file. > > Rebuilding cache ... > ERROR:EDK:440 - platgen failed with errors! > gmake: *** [implementation/system.bmm] Error 2 > ERROR:EDK - > Error while running "gmake -f system.make bits". > Error using gen_xps_files (line 636) > XPS failed. " > > > > Do you have any idea what could be causing this? > We managed to compile a big design that was using the "ten_Gbe_v2" as a > receiver with no problem. > > > Thank you so much for your help! > > Ioana and Jeff > -- Henno Kriel DSP Engineer Digital Back End meerKAT SKA South Africa Third Floor The Park Park Road (off Alexandra Road) Pinelands 7405 Western Cape South Africa Latitude: -33.94329 (South); Longitude: 18.48945 (East). (p) +27 (0)21 506 7300 (p) +27 (0)21 506 7365 (direct) (f) +27 (0)21 506 7375 (m) +27 (0)84 504 5050
