Just look under the mask, and unlink the x_cast block from the library (right-click, link options, disable link). You can't change parameters that are different to the version in the library if the link is intact (which locks this block to be identical to the one in the library). When I checked the block into the library many many months ago, I didn't unlink this block, so you can't change it to anything other than 8 antennas without getting this error. I've been meaning to fix it ever since, but I keep forgetting! I will try'n remember to fix it when I get back to the office on Monday.
Jason On 19 Jan 2013, at 12:25, Nimish Sane wrote: > Hi all: > > I am getting the following errors while updating a model file with xeng block: > > Error in 'xeng/xeng/xeng_descramble_4ant/x_cast': Initialization commands > cannot be evaluated. > Attempting to override parameters of 'xeng/xeng/xeng_descramble_4ant/x_cast' > which is inside a library link. > > I get this error when I set the "number of antennas" as "4". I do not see > this error when I set the number of antennas as "8". > > I realize that there is a different block "xeng_descramble_4ant" used for > 4-antenna setting than "xeng_descramble" block used otherwise. Has anyone > come across this issue and resolved it? > > Thanks a lot, > > Nimish > > > -- > Nimish Sane > > Center for Solar-Terrestrial Research > New Jersey Institute of Technology > University Heights > Newark, NJ 07102-1982 USA > Tel: (973) 642 4958 > Fax: (973) 596 3617 > [email protected]
