Thanks Jason. One actually needs to disable link for the "xeng_descramble_4ant" block.
Thanks, Nimish On Jan 19, 2013, at 5:44 AM, Jason Manley <[email protected]> wrote: > Just look under the mask, and unlink the x_cast block from the library > (right-click, link options, disable link). You can't change parameters that > are different to the version in the library if the link is intact (which > locks this block to be identical to the one in the library). When I checked > the block into the library many many months ago, I didn't unlink this block, > so you can't change it to anything other than 8 antennas without getting this > error. I've been meaning to fix it ever since, but I keep forgetting! I will > try'n remember to fix it when I get back to the office on Monday. > > Jason > > On 19 Jan 2013, at 12:25, Nimish Sane wrote: > >> Hi all: >> >> I am getting the following errors while updating a model file with xeng >> block: >> >> Error in 'xeng/xeng/xeng_descramble_4ant/x_cast': Initialization commands >> cannot be evaluated. >> Attempting to override parameters of 'xeng/xeng/xeng_descramble_4ant/x_cast' >> which is inside a library link. >> >> I get this error when I set the "number of antennas" as "4". I do not see >> this error when I set the number of antennas as "8". >> >> I realize that there is a different block "xeng_descramble_4ant" used for >> 4-antenna setting than "xeng_descramble" block used otherwise. Has anyone >> come across this issue and resolved it? >> >> Thanks a lot, >> >> Nimish >> >> >> -- >> Nimish Sane >> >> Center for Solar-Terrestrial Research >> New Jersey Institute of Technology >> University Heights >> Newark, NJ 07102-1982 USA >> Tel: (973) 642 4958 >> Fax: (973) 596 3617 >> [email protected] >
