Hello: After couple of tests, we found that the ADC clock signal is not able enter to the ROACH2 Rev 2. We physically measure the clock pin on ZDOK (F19,F20) of one 5G adc board which was plugged into Rev 1 and then Rev 2. In the Rev 1, there is clock signal, but no signal in the Rev 2.
4 of ROACH2 Rev. 2 have been tested by 10G ethernet bof file which used the system clock. The Rev 2 boards are working well in that case. The only difference i know is the Rev 1 is under tcpborphserver 2 , and the Rev 2 is under tcpborphserver 3. Is there IO bank control in the tcpborphserver 3 ? regards homin jiang
