Hi, Katty, As you discovered the hard way, the python script and bof file that you attached are not compatible with each other. Where did you get this tutorial?
Thanks, Dave On May 20, 2013, at 9:47 AM, katherine viviana cortes urbina wrote: > Hi all, > > I am sorry but still I can not solve the error > ---------- Forwarded message ---------- > From: katherine viviana cortes urbina <[email protected]> > Date: 2013/5/7 > Subject: Fwd: .py > To: Casper Lists <[email protected]> > > > > Hi all, > > I synthesized a Design this is spectrometer with 2048 channel, 1 GHz in clock > ADC, mode Interleaved. But if I connected to the ROACH by > tut3_interleave_4096.py I have the error in the register cnt_rst this is not > found. > > error : > ./tut3_interleave_4096.py 192.168.100.2 -b s1_2013_May_02_1157.bof > Connecting to server 192.168.100.2 on port 7147... ok > > ------------------------ > Programming FPGA with s1_2013_May_02_1157.bof... done > Configuring accumulation period... done > Resetting counters... FAILURE DETECTED. Log entries: > 192.168.100.2: Starting thread Thread-1 > 192.168.100.2: #version poco-0.1 > 192.168.100.2: #build-state poco-0.2804 > 192.168.100.2: ?progdev s1_2013_May_02_1157.bof > > 192.168.100.2: !progdev ok 512 > 192.168.100.2: Programming FPGA with s1_2013_May_02_1157.bof... ok. > 192.168.100.2: ?write acc_len 0 \0 \0\0 > > 192.168.100.2: !write ok > 192.168.100.2: ?read acc_len 0 4 > > 192.168.100.2: !read ok \0 \0\0 > 192.168.100.2: Write 40000 to register acc_len at offset 0 ok. > 192.168.100.2: ?write cnt_rst 0 \0\0\0 > > 192.168.100.2: #log error 371725520384 poco register\_cnt_rst\_not\_found > 192.168.100.2: 371725520384 poco: register cnt_rst not found > 192.168.100.2: !write fail register > 192.168.100.2: Request write failed. > Request: ?write cnt_rst 0 \0\0\0 > Reply: !write fail register. > None > Traceback (most recent call last): > File "./tut3_interleave_4096.py", line 155, in <module> > exit_fail() > File "./tut3_interleave_4096.py", line 132, in <module> > > fpga.write_int('cnt_rst',1) > File "/usr/local/lib/python2.6/site-packages/corr/katcp_wrapper.py", line > 411, in write_int > self.write(device_name, data, offset*4) > File "/usr/local/lib/python2.6/site-packages/corr/katcp_wrapper.py", line > 351, in write > self.blindwrite(device_name, data, offset) > File "/usr/local/lib/python2.6/site-packages/corr/katcp_wrapper.py", line > 375, in blindwrite > self._request("write", device_name, str(offset), data) > File "/usr/local/lib/python2.6/site-packages/corr/katcp_wrapper.py", line > 67, in _request > % (request.name, request, reply)) > RuntimeError: Request write failed. > Request: ?write cnt_rst 0 \0\0\0 > Reply: !write fail register. > > any idea? > > Cheers katty > > <tut3_interleave_4096.py><s1_2013_May_02_1157.bof>
