Hi Adam,
With respect to the LED, I found that the alarm was caused by the
external fans being disconnected. I was able to probe R74 through R77
to narrow it down to fans. I am operating with the board externally
cooled, not in a chassis, so the chassis fans are not connected.
Interestingly enough, when I connected to tborphserver3 interface and
queried the individual sensors as you recommended, it reported 0's for
three of the fans and*the fault went away*! Does that make any sense?
Thanks for the help,
Rich
On 5/28/2013 1:42 PM, [email protected] wrote:
Fault LED
