Hi David, Just duplicating the email I sent you off list on the offchance it's useful to someone on the maillist in the future.
My versions for the ADC64x64-12 (64 inputs, 64 MSa/s, 12 bits) are (https://casper.berkeley.edu/wiki/64ADCx64-12) (https://casper.berkeley.edu/wiki/X64_adc) MATLAB -- 2009b Sysgen 11.4 (yes, I live in the past) Libraries -- https://github.com/oxfork/mlib_devel on special occasions I've also used sysgen 13.4 and matlab 2011b, which I haven't had any problems with. A few models are at https://github.com/griffinfoster/medicina/tree/master/firmware/feng You shouldn't have to do anything in addition to using those libraries, but this is simulink, so I wouldn't stake my life on it. Cheers, Jack On 14 August 2013 21:55, Gerry Harp <[email protected]> wrote: > Hi David Saroff > > As a old/newbie, I'm not fully up on the lingo. Can you break down the > meaning of 64ADC64-12 for me? > > 64 inputs? 64 outputs? 12 bits? > > Thanks > > Gerry > > > On 8/13/2013 1:22 PM, David Saroff wrote: >> >> Folks, >> >> I've discovered that the CASPER tools are picky about versions of matlab, >> xilinx, and library, and the 64 channel ADC is only supported (currently) >> on roach1. So may I join you using the 64ADC64-12 on a roach1? To help me >> get started, if you have a working .bof and the .mdl it was compiled from >> for the 64ADC64-12 on a roach1, please let me try them. I will set up my >> 64ADC64-12 on a roach1 and try to use the .bof. I will set up my computer >> exactly like yours and recompile from the .mdl if you can give me this >> information: >> >> what version of xilinx tools? >> what version of matlab? >> which library and what version? >> >> is there anything else you had to do to compile that .mdl? (occult >> incantations, bribery, etc ;-) >> >> >> David >> >> >> > > -- > ---------------------- > Gerald R. Harp, Ph.D. > Director, Center for SETI Research > SETI Institute > >
