*Dear Casperian,I met a problem when I netboot roach2-rev2 board. The
modprobe files in the debian_stable_devel folder are missing. I can only
run some simple scrip via minicom. The server used to control roach2 is an
CenOS system, not Debian, but I was able to install all tool kits required
according to 'roach2 production test machine setup'. Here is the messages
shown in minicom: The netboot is good till the following the msg:*
IP-Config: Complete:
device=eth0, addr=192.168.40.63, mask=255.255.255.0, gw=255.255.255.255
host=roach2, domain=ee.washington.edu, nis-domain=(none)
bootserver=192.168.40.1, rootserver=192.168.40.1,
rootpath=/home/nfs/roach2/current,nolock
nameserver0=192.168.40.1VFS: Mounted root (nfs filesystem) readonly on
device 0:11.
*Then, the error msgs start to show up: *
modprobe: FATAL: Could not load /lib/modules/3.7.0-rc2+/modules.dep: No
such file or directory
modprobe: FATAL: Could not load /lib/modules/3.7.0-rc2+/modules.dep: No
such file or directory
modprobe: FATAL: Could not load /lib/modules/3.7.0-rc2+/modules.dep: No
such file or directory
INIT: version 2.88 booting
about to run simple init script
warning: can't open /etc/mtab: No such file or directory
mount: mount point /proc/bus/usb does not exist
INIT: Entering runlevel: 2
modprobe: FATAL: Could not load /lib/modules/3.7.0-rc2+/modules.dep: No
such file or directory
1 Jan 00:00:15 ntpdate[452]: no server suitable for synchronization found
Starting OpenBSD Secure Shell server: sshdmodprobe: FATAL: Could not load
/lib/modules/3.7.0-rc2+y
modprobe: FATAL: Could not load /lib/modules/3.7.0-rc2+/modules.dep: No
such file or directory
.
Starting NFS common utilities: statd failed!
Starting NTP server: ntpdmodprobe: FATAL: Could not load
/lib/modules/3.7.0-rc2+/modules.dep: No y
.
tcpborphserver: ... loading roach mmap driver ...
insmod: can't read '/lib/modules/roach_mmap.ko': No such file or directory
version *3* using mmap
tcpborphserver3: about to go into background
*Any suggestions are extremely appreciated! Weiwei *
