Mark, First I am now pinging the ROACH2 V6 port, but I still get the log info lines on the KATCP screen. Executing the ?tap-info produces this result:
#log info 964298199431 raw detected\_time\_warp\_or\_stall,\_rescheduling\_periodic\_task\_for\_964298199.434018s #log info 964298200011 raw detected\_time\_warp\_or\_stall,\_rescheduling\_periodic\_task\_for\_964298200.014640s #log info 964298200592 raw detected\_time\_warp\_or\_stall,\_rescheduling\_periodic\_task\_for\_964298200.595206s ?tap-info Riometer0 #log info 964298200737 raw peer\_02:02:00:00:00:00\_at\_29 #log info 964298200737 raw peer\_d0:67:e5:f1:9b:e7\_at\_15000 #log info 964298200738 raw peer\_00:1a:a0:b1:1e:9b\_at\_15000 #log info 964298200738 raw peer\_00:1e:4f:cc:cc:b4\_at\_15000 #log info 964298200738 raw current\_iteration\_0 #log info 964298200738 raw buffers\_arp=0/rx=0/tx=0 #log info 964298200738 raw polling\_interval\_3 #log info 964298200738 raw address\_192.168.6.29 #log info 964298200738 raw gateware\_port\_is\_4321 #log info 964298200738 raw gateware\_name\_Riometer0 #log info 964298200738 raw tap\_device\_name\_Riometer0\_on\_fd\_27 !tap-info ok #log info 964298201173 raw detected\_time\_warp\_or\_stall,\_rescheduling\_periodic\_task\_for\_964298201.175901s #log info 964298201753 raw detected\_time\_warp\_or\_stall,\_rescheduling\_periodic\_task\_for\_964298201.756451s > Are you running ntpd or similar ? No I am not running ntpd or similar. > Or is there something else competing for CPU time ? The only programs running on the CPU are those programs which are loaded when the ROACH-2 is powered using the solo-boot protocol. -Joe Kujawski
