Hi all
Newbie here.
I'm busy working on tut 1 for the ROACH 2 board. I have been able to connect to
the board but when programming it using the command:
fpga.upload_to_ram_and_program('your_fpgfile.fpg')
I get the following error:
RuntimeError: 192.168.2.3: no programming informs yet. Odd?
I have made sure that all three files (*.bof, *.bit and *.info) are in the
current working directory. In the tutorial they mention moving the *.fpg file
but then in the example they talk about the *.bof file.
On successful compilation of your simulink model, a .fpg file will be created
in your_model_name/bit_files/ . Move this to an accessible folder on the
workshop server.S server.
mv path/to/your/modelfolder/your_model_name/bitfiles/your_boffile.bof
path/to/test/folder
I do not have a *.fpg in the folder mentioned above only a *.bof file.
Any help would be greatly appreciated.
Thanks
Regards
[Opti-Num Solutions]
Louise Forbes
Application Engineer
t: +27 11 325 6238
www.optinum.co.za<http://www.optinum.co.za>
Seminar<http://www.optinum.co.za/events/SMMBD08?source_id=emailSig> - System
Design: Modelling and Simulation Using MATLAB and Simulink, 17 May 2016,
Johnnesburg
Seminar<http://www.optinum.co.za/events/SMMBD09?source_id=emailSig> -
Hardware-Based Rapid Prototyping using MATLAB and Simulink, 18 May 2016,
Centurion
[http://www.optinum.co.za/_images/LinkedInBug-16px.png] follow
us<http://www.linkedin.com/company/opti-num-solutions>
