Hi Christopher, Cool, 50% of problems solved! If you throw a scope on the enable and reset inputs of the counter you hopefully will see something amiss.
J On Tue, 14 Jun 2016 at 11:17 Christopher Barnes <barnc...@umich.edu> wrote: > The axes were not auto-scaled for the adder; you were correct. > > For the counter, the settings are correct; I just checked them again. Do > you have any more ideas on this? > > On Tue, Jun 14, 2016 at 2:04 PM, Jack Hickish <jackhick...@gmail.com> > wrote: > >> For the adder, have you clicked the icon at the top marked with a pair of >> binoculars to auto-scale the axes? >> >> For the counter, are your control signal and slicing definitely correct >> -- i.e., is the reset of the counter 0, and the enable of the counter 1? >> >> Cheers >> Jack >> >> On Tue, 14 Jun 2016 at 11:00 Christopher Barnes <barnc...@umich.edu> >> wrote: >> >>> Jack, >>> >>> I'm not able to reproduce the counter output ( >>> https://casper.berkeley.edu/wiki/File:Counter_sim.png) or the Adder >>> Output (https://casper.berkeley.edu/wiki/File:Adder_sim.png). Instead >>> of those two, I get a line at 0 for the counter output and then just an >>> empty set of axes for the adder output. >>> >>> On Tue, Jun 14, 2016 at 1:56 PM, Jack Hickish <jackhick...@gmail.com> >>> wrote: >>> >>>> Hi Christopher, >>>> >>>> Which scope outputs are you not able to reproduce from the wiki? What >>>> outputs did you see? >>>> >>>> Cheers >>>> Jack >>>> >>>> On Tue, 14 Jun 2016 at 10:21 Christopher Barnes <barnc...@umich.edu> >>>> wrote: >>>> >>>>> Hello, >>>>> >>>>> My name is Christopher Barnes, and I'm a graduate student at the >>>>> University of Michigan. I'm working through the first four tutorials on >>>>> the Casper website (located at >>>>> https://casper.berkeley.edu/wiki/Tutorials) to program a ROACH2 as a >>>>> wideband pocket correlator. I've finished building the .mdl file from the >>>>> first tutorial, and my output from the scopes did not match what is >>>>> displayed on the webpage, so I'm requesting some help with this. I'm a >>>>> beginner, so I'm not sure what the problem could be aside from the >>>>> cookbook >>>>> instructions on the website. >>>>> >>>>> If you're willing to help me, then please email me back and I can show >>>>> you my file. My suspicion is that the discrepancy between my output and >>>>> the output on the webpage is caused by an outdated release of the tools in >>>>> Simulink. >>>>> >>>>> >>>>> >>> >>> >>> -- >>> Physics Graduate Student Symposium >>> University of Michigan >>> sympphysg...@umich.edu >>> Website <http://logan.physics.lsa.umich.edu/gss/> >>> >>> > > > -- > Physics Graduate Student Symposium > University of Michigan > sympphysg...@umich.edu > Website <http://logan.physics.lsa.umich.edu/gss/> > >