Hello Heystek, This should be a relatively trivial problem to solve:
cd ~ # This is a shortcut for your home directory git clone <URL of repository here - either the casper-astro one or the SKA-SA one> cd mlib-devel ./startsg If that doesn't work, then do this: chmod +x startsg Then you should be fine. Regards, James On Mon, Aug 15, 2016 at 7:46 PM, Heystek Grobler <heystekgrob...@gmail.com> wrote: > Hi Adam and James > > I am working on my personal computer. I will ask a IT guy to help me with > the privileges and also clone the mlib-devel into the home directory and > try to run it again. > > Thanks for all your help. > > Heystek > > On Mon, Aug 15, 2016 at 12:58 PM, Adam Isaacson <aisaac...@ska.ac.za> > wrote: > >> Hi Heystek, >> >> This issue is not with your script, but your linux permissions. I suggest >> you follow what James suggests. The fact that you can't run sudo though >> means that you may need your IT guy to give you sudo rights, but if you are >> working off the university server that may be an issue - as James says, you >> shouldn't need this if you install into your home directory. >> >> Kind Regards, >> >> Adam >> >> On Mon, Aug 15, 2016 at 11:27 AM, James Smith <jsm...@ska.ac.za> wrote: >> >>> Hello Heystek, >>> >>> It would be a bit easier to debug if you posted the terminal session, >>> along with the commands you ran. >>> >>> Also, please run "ls -l" in the directory and post that as well. It >>> might just be that you need to give the file executable permissions. >>> >>> Regards, >>> James >>> >>> >>> On Mon, Aug 15, 2016 at 11:24 AM, Heystek Grobler < >>> heystekgrob...@gmail.com> wrote: >>> >>>> Hi Adam >>>> >>>> I modified the startsg file. When I run it I get the error in the >>>> terminal "Permission denied". When I run the startsg file as sudo I get the >>>> error "command not found". >>>> >>>> I have attached my modified startsg file. >>>> >>>> Do you perhaps have any ideas of how to solve it? >>>> >>>> Sorry for the inconvenience >>>> >>>> Heystek >>>> >>>> On Mon, Aug 15, 2016 at 11:10 AM, Adam Isaacson <aisaac...@ska.ac.za> >>>> wrote: >>>> >>>>> Hi Heystek, >>>>> >>>>> Nope, just run the ./startsg and matlab will run the startup.m file >>>>> for you when it opens. You should already have both the startsg and >>>>> startup.m files, but I gave you mine as I know it works. >>>>> >>>>> Kind Regards, >>>>> >>>>> Adam >>>>> >>>>> On Mon, Aug 15, 2016 at 10:58 AM, Heystek Grobler < >>>>> heystekgrob...@gmail.com> wrote: >>>>> >>>>>> Hi Adam >>>>>> >>>>>> I will try these files! Do I run the startup.m file in matlab as >>>>>> well? >>>>>> >>>>>> Have a nice day >>>>>> >>>>>> Heystek >>>>>> >>>>>> On Mon, Aug 15, 2016 at 9:04 AM, Adam Isaacson <aisaac...@ska.ac.za> >>>>>> wrote: >>>>>> >>>>>>> Hi Heystek, >>>>>>> >>>>>>> No worries. I was in your position just a few months ago :). I have >>>>>>> attached my matlab startup scripts (startsg and startup.m). These must >>>>>>> be >>>>>>> placed in the "mlib_devel" directory. You will probably have to change >>>>>>> the >>>>>>> paths to where your installs are. >>>>>>> >>>>>>> All you need to do is the following: >>>>>>> >>>>>>> 1) Startup matlab R2012b, by running the startsg script. Using the >>>>>>> Ubuntu terminal, in the "mlib_devel" directory type: "./startsg". This >>>>>>> should startup matlab. There should be a message saying that "system >>>>>>> generator currently found installed in matlab default path..." >>>>>>> 2) Type in "simulink" in the command window. >>>>>>> 3) The Simulink Library Browser will open. Browse to where your >>>>>>> model is located and select the *.slx file. >>>>>>> 4) The model should open. Press "Ctrl + D" to check for any errors. >>>>>>> There should be no errors. >>>>>>> 5) Type in "casper_xps" in the command window. The casper XPS window >>>>>>> should pop up. Make sure all boxes are ticked under "ISE Design Flow >>>>>>> Choice:" and then click on "Run XPS". This will run the system >>>>>>> generator as >>>>>>> part of the process, the Xilinx ISE and generate the relevant bit, fpg >>>>>>> files. >>>>>>> >>>>>>> I have also attached scripts if you just want to run the programs >>>>>>> individually - you will need to edit the path to where your installs >>>>>>> are. >>>>>>> >>>>>>> Good luck. This should get you going. If the scripts bomb out then >>>>>>> it is likely that your paths are not correct - check that first. >>>>>>> >>>>>>> Kind Regards, >>>>>>> >>>>>>> Adam >>>>>>> >>>>>>> On Sun, Aug 14, 2016 at 8:26 PM, Heystek Grobler < >>>>>>> heystekgrob...@gmail.com> wrote: >>>>>>> >>>>>>>> Hi Adam >>>>>>>> >>>>>>>> I got ISE to run. It open up die GUI. How do I start the sysgen >>>>>>>> with MATLAB? >>>>>>>> >>>>>>>> Sorry about the queations. >>>>>>>> >>>>>>>> Thank you for your help >>>>>>>> >>>>>>>> Heystek >>>>>>>> >>>>>>>> On Sun, Aug 14, 2016 at 12:06 PM, Heystek Grobler < >>>>>>>> heystekgrob...@gmail.com> wrote: >>>>>>>> >>>>>>>>> Good day Adam >>>>>>>>> >>>>>>>>> I have been working through the documents you send me. I cant open >>>>>>>>> the ISE IDE. As soon as I run the script I get the following error: >>>>>>>>> >>>>>>>>> command not found >>>>>>>>> >>>>>>>>> I am new to Linux and Xilinx. >>>>>>>>> >>>>>>>>> Have a good day >>>>>>>>> >>>>>>>>> Heystek >>>>>>>>> >>>>>>>>> On Mon, Aug 8, 2016 at 3:31 PM, Adam Isaacson <aisaac...@ska.ac.za >>>>>>>>> > wrote: >>>>>>>>> >>>>>>>>>> Hi Heystek, >>>>>>>>>> >>>>>>>>>> You mentioned that you were using the ROACH2 board. This contains >>>>>>>>>> a Virtex 6 device. Vivado only works with Virtex 7 onwards. I would >>>>>>>>>> suggest >>>>>>>>>> if you are going to target the ROACH 2 that you use Xilinx ISE 14.7. >>>>>>>>>> >>>>>>>>>> You will need to work with ISE 14.7 and not Vivado. We have just >>>>>>>>>> begun to use Vivado for our Virtex 7 board e.g SKARAB. As far as I >>>>>>>>>> am >>>>>>>>>> aware, all the the ROACH2 development in SKA-SA has been done using >>>>>>>>>> Xilinx >>>>>>>>>> ISE 14., as it supports Virtex 6 devices. >>>>>>>>>> >>>>>>>>>> Kind Regards, >>>>>>>>>> >>>>>>>>>> Adam >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> On Mon, Aug 8, 2016 at 3:13 PM, Heystek Grobler < >>>>>>>>>> heystekgrob...@gmail.com> wrote: >>>>>>>>>> >>>>>>>>>>> Good day Adam >>>>>>>>>>> >>>>>>>>>>> I am using Ubuntu 14.04 LTS with MATLAB 2012B. Im using the >>>>>>>>>>> Vivado suite that came with a Zed-Board (Vivado 2013.4). >>>>>>>>>>> >>>>>>>>>>> The error I am receiving from MATLAB at startup is: >>>>>>>>>>> Undefined function 'lAddSysgen' for input arguments of type >>>>>>>>>>> 'char'. >>>>>>>>>>> > In matlabrc at 205 >>>>>>>>>>> >>>>>>>>>>> The errors I get from the system generator is: >>>>>>>>>>> 1. Design Error - Default block diagram >>>>>>>>>>> 2. Block Error - AddSub >>>>>>>>>>> >>>>>>>>>>> These errors occurs with the first tutorial from CASPER. >>>>>>>>>>> >>>>>>>>>>> I looked at the "tweaks to compile" but everything seems ok. >>>>>>>>>>> >>>>>>>>>>> I will use the guides you have attached in the previous email. >>>>>>>>>>> >>>>>>>>>>> I appreciate your help!! >>>>>>>>>>> >>>>>>>>>>> Heystek >>>>>>>>>>> >>>>>>>>>>> On Mon, Aug 8, 2016 at 2:30 PM, Adam Isaacson < >>>>>>>>>>> aisaac...@ska.ac.za> wrote: >>>>>>>>>>> >>>>>>>>>>>> Apologies, that should of been Ubuntu 14.04 LTS and Matlab >>>>>>>>>>>> R2015b... >>>>>>>>>>>> >>>>>>>>>>>> On Mon, Aug 8, 2016 at 2:28 PM, Adam Isaacson < >>>>>>>>>>>> aisaac...@ska.ac.za> wrote: >>>>>>>>>>>> >>>>>>>>>>>>> Hi Heystek, >>>>>>>>>>>>> >>>>>>>>>>>>> What OS are you using? I am using Ubuntu 4.04 LTS. What repo >>>>>>>>>>>>> are you using? I am using https://github.com/ska-sa/mlib_devel. >>>>>>>>>>>>> What version of Matlab and Xilinx are you using? I am using >>>>>>>>>>>>> Matlab R2012b >>>>>>>>>>>>> and R2105b. I am using Xilinx ISE 14.7. I wrote these How To docs >>>>>>>>>>>>> which may >>>>>>>>>>>>> or may not come in handy. >>>>>>>>>>>>> >>>>>>>>>>>>> 1) Matlab 2012b and 2015b Installation: >>>>>>>>>>>>> https://drive.google.com/open?id=18BBkoWlSGeuK8BV1UlSnRJIYzl >>>>>>>>>>>>> OEWUhqTlF_zAePTj0 >>>>>>>>>>>>> >>>>>>>>>>>>> 2) Xilinx ISE 14.7 Installation: >>>>>>>>>>>>> https://drive.google.com/open?id=1o7Wl7wzB7VE1Cckk60B35WerJv >>>>>>>>>>>>> l5crXa7Q5xbcoYgE0 >>>>>>>>>>>>> >>>>>>>>>>>>> This should be read in conjunction with the CASPER wiki page - >>>>>>>>>>>>> https://casper.berkeley.edu/wiki/MSSGE_Setup_with_Xilinx_1 >>>>>>>>>>>>> 4.x_and_Matlab_2012b - did you follow "tweaks to be able to >>>>>>>>>>>>> compile"? >>>>>>>>>>>>> >>>>>>>>>>>>> Kind Regards, >>>>>>>>>>>>> >>>>>>>>>>>>> Adam >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> On Mon, Aug 8, 2016 at 1:53 PM, Heystek Grobler < >>>>>>>>>>>>> heystekgrob...@gmail.com> wrote: >>>>>>>>>>>>> >>>>>>>>>>>>>> Good Day >>>>>>>>>>>>>> >>>>>>>>>>>>>> My name is Heystek Grobler. I am an electrical en electronic >>>>>>>>>>>>>> engineering science student and for my final year project >>>>>>>>>>>>>> (skripsie) I'm >>>>>>>>>>>>>> developing a wideband spectrometer on a ROACH-2 board. >>>>>>>>>>>>>> >>>>>>>>>>>>>> Currently I have a problem with Xilinx System Generator and >>>>>>>>>>>>>> MATLAB. The Simulink Model runs as a simulation but as soon as I >>>>>>>>>>>>>> run it in >>>>>>>>>>>>>> Xilinx System Generator to compile it for the board it crashes >>>>>>>>>>>>>> and gives a >>>>>>>>>>>>>> "design error" as and "block error". >>>>>>>>>>>>>> >>>>>>>>>>>>>> I was hoping that if possible, that you could provide me with >>>>>>>>>>>>>> assistance to get Xilinx and Simulink up and running. So far I >>>>>>>>>>>>>> followed the >>>>>>>>>>>>>> CASPER tutorials but got stuck with this problem/ >>>>>>>>>>>>>> >>>>>>>>>>>>>> I hope to hear from you soon. >>>>>>>>>>>>>> >>>>>>>>>>>>>> Have a wonderful day >>>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> -- >>>>>>>>>>>>> >>>>>>>>>>>>> Adam Isaacson >>>>>>>>>>>>> >>>>>>>>>>>>> DBE: FPGA Engineer >>>>>>>>>>>>> >>>>>>>>>>>>> SKA-SA >>>>>>>>>>>>> >>>>>>>>>>>>> 3rd Floor >>>>>>>>>>>>> >>>>>>>>>>>>> The Park >>>>>>>>>>>>> >>>>>>>>>>>>> Park Road >>>>>>>>>>>>> >>>>>>>>>>>>> Pinelands >>>>>>>>>>>>> >>>>>>>>>>>>> 7405 >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> Tel: +27215067300 (W) >>>>>>>>>>>>> >>>>>>>>>>>>> Fax: +27215067375 (W) >>>>>>>>>>>>> >>>>>>>>>>>>> Cell: +27825639602 >>>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> -- >>>>>>>>>>>> >>>>>>>>>>>> Adam Isaacson >>>>>>>>>>>> >>>>>>>>>>>> DBE: FPGA Engineer >>>>>>>>>>>> >>>>>>>>>>>> SKA-SA >>>>>>>>>>>> >>>>>>>>>>>> 3rd Floor >>>>>>>>>>>> >>>>>>>>>>>> The Park >>>>>>>>>>>> >>>>>>>>>>>> Park Road >>>>>>>>>>>> >>>>>>>>>>>> Pinelands >>>>>>>>>>>> >>>>>>>>>>>> 7405 >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> Tel: +27215067300 (W) >>>>>>>>>>>> >>>>>>>>>>>> Fax: +27215067375 (W) >>>>>>>>>>>> >>>>>>>>>>>> Cell: +27825639602 >>>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> -- >>>>>>>>>> >>>>>>>>>> Adam Isaacson >>>>>>>>>> >>>>>>>>>> DBE: FPGA Engineer >>>>>>>>>> >>>>>>>>>> SKA-SA >>>>>>>>>> >>>>>>>>>> 3rd Floor >>>>>>>>>> >>>>>>>>>> The Park >>>>>>>>>> >>>>>>>>>> Park Road >>>>>>>>>> >>>>>>>>>> Pinelands >>>>>>>>>> >>>>>>>>>> 7405 >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> Tel: +27215067300 (W) >>>>>>>>>> >>>>>>>>>> Fax: +27215067375 (W) >>>>>>>>>> >>>>>>>>>> Cell: +27825639602 >>>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>> >>>>>>> >>>>>>> >>>>>>> -- >>>>>>> >>>>>>> Adam Isaacson >>>>>>> >>>>>>> DBE: FPGA Engineer >>>>>>> >>>>>>> SKA-SA >>>>>>> >>>>>>> 3rd Floor >>>>>>> >>>>>>> The Park >>>>>>> >>>>>>> Park Road >>>>>>> >>>>>>> Pinelands >>>>>>> >>>>>>> 7405 >>>>>>> >>>>>>> >>>>>>> Tel: +27215067300 (W) >>>>>>> >>>>>>> Fax: +27215067375 (W) >>>>>>> >>>>>>> Cell: +27825639602 >>>>>>> >>>>>> >>>>>> >>>>> >>>>> >>>>> -- >>>>> >>>>> Adam Isaacson >>>>> >>>>> DBE: FPGA Engineer >>>>> >>>>> SKA-SA >>>>> >>>>> 3rd Floor >>>>> >>>>> The Park >>>>> >>>>> Park Road >>>>> >>>>> Pinelands >>>>> >>>>> 7405 >>>>> >>>>> >>>>> Tel: +27215067300 (W) >>>>> >>>>> Fax: +27215067375 (W) >>>>> >>>>> Cell: +27825639602 >>>>> >>>> >>>> >>> >> >> >> -- >> >> Adam Isaacson >> >> DBE: FPGA Engineer >> >> SKA-SA >> >> 3rd Floor >> >> The Park >> >> Park Road >> >> Pinelands >> >> 7405 >> >> >> Tel: +27215067300 (W) >> >> Fax: +27215067375 (W) >> >> Cell: +27825639602 >> > >
