Hi Adam I got ISE to run. It open up die GUI. How do I start the sysgen with MATLAB?
Sorry about the queations. Thank you for your help Heystek On Sun, Aug 14, 2016 at 12:06 PM, Heystek Grobler <heystekgrob...@gmail.com> wrote: > Good day Adam > > I have been working through the documents you send me. I cant open the ISE > IDE. As soon as I run the script I get the following error: > > command not found > > I am new to Linux and Xilinx. > > Have a good day > > Heystek > > On Mon, Aug 8, 2016 at 3:31 PM, Adam Isaacson <aisaac...@ska.ac.za> wrote: > >> Hi Heystek, >> >> You mentioned that you were using the ROACH2 board. This contains a >> Virtex 6 device. Vivado only works with Virtex 7 onwards. I would suggest >> if you are going to target the ROACH 2 that you use Xilinx ISE 14.7. >> >> You will need to work with ISE 14.7 and not Vivado. We have just begun >> to use Vivado for our Virtex 7 board e.g SKARAB. As far as I am aware, all >> the the ROACH2 development in SKA-SA has been done using Xilinx ISE 14., as >> it supports Virtex 6 devices. >> >> Kind Regards, >> >> Adam >> >> >> >> >> >> On Mon, Aug 8, 2016 at 3:13 PM, Heystek Grobler <heystekgrob...@gmail.com >> > wrote: >> >>> Good day Adam >>> >>> I am using Ubuntu 14.04 LTS with MATLAB 2012B. Im using the Vivado suite >>> that came with a Zed-Board (Vivado 2013.4). >>> >>> The error I am receiving from MATLAB at startup is: >>> Undefined function 'lAddSysgen' for input arguments of type 'char'. >>> > In matlabrc at 205 >>> >>> The errors I get from the system generator is: >>> 1. Design Error - Default block diagram >>> 2. Block Error - AddSub >>> >>> These errors occurs with the first tutorial from CASPER. >>> >>> I looked at the "tweaks to compile" but everything seems ok. >>> >>> I will use the guides you have attached in the previous email. >>> >>> I appreciate your help!! >>> >>> Heystek >>> >>> On Mon, Aug 8, 2016 at 2:30 PM, Adam Isaacson <aisaac...@ska.ac.za> >>> wrote: >>> >>>> Apologies, that should of been Ubuntu 14.04 LTS and Matlab R2015b... >>>> >>>> On Mon, Aug 8, 2016 at 2:28 PM, Adam Isaacson <aisaac...@ska.ac.za> >>>> wrote: >>>> >>>>> Hi Heystek, >>>>> >>>>> What OS are you using? I am using Ubuntu 4.04 LTS. What repo are you >>>>> using? I am using https://github.com/ska-sa/mlib_devel. What version >>>>> of Matlab and Xilinx are you using? I am using Matlab R2012b and R2105b. I >>>>> am using Xilinx ISE 14.7. I wrote these How To docs which may or may not >>>>> come in handy. >>>>> >>>>> 1) Matlab 2012b and 2015b Installation: >>>>> https://drive.google.com/open?id=18BBkoWlSGeuK8BV1UlSnRJIYzl >>>>> OEWUhqTlF_zAePTj0 >>>>> >>>>> 2) Xilinx ISE 14.7 Installation: >>>>> https://drive.google.com/open?id=1o7Wl7wzB7VE1Cckk60B35WerJv >>>>> l5crXa7Q5xbcoYgE0 >>>>> >>>>> This should be read in conjunction with the CASPER wiki page - >>>>> https://casper.berkeley.edu/wiki/MSSGE_Setup_with_Xilinx_1 >>>>> 4.x_and_Matlab_2012b - did you follow "tweaks to be able to compile"? >>>>> >>>>> Kind Regards, >>>>> >>>>> Adam >>>>> >>>>> >>>>> >>>>> >>>>> On Mon, Aug 8, 2016 at 1:53 PM, Heystek Grobler < >>>>> heystekgrob...@gmail.com> wrote: >>>>> >>>>>> Good Day >>>>>> >>>>>> My name is Heystek Grobler. I am an electrical en electronic >>>>>> engineering science student and for my final year project (skripsie) I'm >>>>>> developing a wideband spectrometer on a ROACH-2 board. >>>>>> >>>>>> Currently I have a problem with Xilinx System Generator and MATLAB. >>>>>> The Simulink Model runs as a simulation but as soon as I run it in Xilinx >>>>>> System Generator to compile it for the board it crashes and gives a >>>>>> "design >>>>>> error" as and "block error". >>>>>> >>>>>> I was hoping that if possible, that you could provide me with >>>>>> assistance to get Xilinx and Simulink up and running. So far I followed >>>>>> the >>>>>> CASPER tutorials but got stuck with this problem/ >>>>>> >>>>>> I hope to hear from you soon. >>>>>> >>>>>> Have a wonderful day >>>>>> >>>>> >>>>> >>>>> >>>>> -- >>>>> >>>>> Adam Isaacson >>>>> >>>>> DBE: FPGA Engineer >>>>> >>>>> SKA-SA >>>>> >>>>> 3rd Floor >>>>> >>>>> The Park >>>>> >>>>> Park Road >>>>> >>>>> Pinelands >>>>> >>>>> 7405 >>>>> >>>>> >>>>> Tel: +27215067300 (W) >>>>> >>>>> Fax: +27215067375 (W) >>>>> >>>>> Cell: +27825639602 >>>>> >>>> >>>> >>>> >>>> -- >>>> >>>> Adam Isaacson >>>> >>>> DBE: FPGA Engineer >>>> >>>> SKA-SA >>>> >>>> 3rd Floor >>>> >>>> The Park >>>> >>>> Park Road >>>> >>>> Pinelands >>>> >>>> 7405 >>>> >>>> >>>> Tel: +27215067300 (W) >>>> >>>> Fax: +27215067375 (W) >>>> >>>> Cell: +27825639602 >>>> >>> >>> >> >> >> -- >> >> Adam Isaacson >> >> DBE: FPGA Engineer >> >> SKA-SA >> >> 3rd Floor >> >> The Park >> >> Park Road >> >> Pinelands >> >> 7405 >> >> >> Tel: +27215067300 (W) >> >> Fax: +27215067375 (W) >> >> Cell: +27825639602 >> > >
