Hi Dave, Thanks for your reply. I did try commenting out that line but doesn't seem to solve the problem.
Thanks a lot for your time helping on this though. I'll wait and see if anybody else has a different workaround. Regards, Vijay. On Mon, Apr 2, 2018 at 7:04 PM, David MacMahon <[email protected]> wrote: > Hi, Vijay, > > Since your HDL is not combinatorial you should comment out this line in > your config.m file: > > % System Generator has to assume that your entity has a combinational > feed through; > % if it doesn't, then comment out the following line: > this_block.tagAsCombinational; > > > I'm not sure this will fix your problem, but there's no other obvious > problems that i can see. > > HTH, > Dave > > On Apr 2, 2018, at 13:12, Vijay Kumar <[email protected]> wrote: > > Hi Dave, > > I referred to the black box guide, so I have a single clock and a clock > enable. > And the config file was generated from the wizard. > I am attaching herewith my model which is a simple one to generate a > sinusoid signal. > > I would be much grateful if you could please have look at this. > > Thanks, > Vijay. > > > > > On Sun, Apr 1, 2018 at 4:36 PM, David MacMahon <[email protected]> > wrote: > >> I'm not sure what's causing your problem, but here are some other >> ideas... Did you use the Black Box Wizard to create a "...config.m" file >> for your HDL or did you hand code it? Does your top level HDL have a >> single clock input and a clock enable input? Does your config.m file list >> all the HDL files needed to build your HDL? You could check the system >> generator synthesis report to ensure that it is synthesizing your HDL as >> you would expect. >> >> Dave >> >> >> On Apr 1, 2018, at 13:14, Vijay Kumar <[email protected]> wrote: >> >> Hi David, >> >> Yes, the normal designs that don't have black boxes compile without any >> problem. I am not sure why this "Possible deprecated ..." warning is >> given. I have seen it in few emails for other Casperites, so I thought it >> was normal. >> >> The OS is: Red Hat (release 6.7) >> >> Thanks for your help on this. >> >> Regards, >> Vijay. >> >> On Sun, Apr 1, 2018 at 3:34 PM, David MacMahon <[email protected]> >> wrote: >> >>> Hi, Vijay, >>> >>> Are you able to compile a simple model without using the back box >>> block? The "Possible deprecated use of get on a Java object with an HG >>> Property 'UserData'" waning seems like a simulink and/or system generator >>> issue. And the segmentation fault when running xps is not a good sign at >>> all. What OS are you using? >>> >>> Dave >>> >>> >>> On Apr 1, 2018, at 10:58, Vijay Kumar <[email protected]> >>> wrote: >>> >>> Hi Jack, >>> >>> Thanks a lot for your reply. >>> >>> I am trying to incorporate a verilog design with the Casper design. It's >>> a simple test design and works in simulation. So probably no HDL syntax >>> issues. >>> The setup I am using is Xilinx 14.4 based one with Matlab 2012b and >>> unfortunately, I don't have the 14.7 setup. Do you think its an issue >>> with the tool setup? >>> >>> Please see the below outputs for the mlib_devel version. >>> >>> $ git rev-parse HEAD >>> a949c9d5c1761078b4c884699ff52c1497a17ff6 >>> >>> git describe --tags >>> mlib_devel-2010-09-20-1369-ga949c9d >>> >>> >>> Thanks again for your help. >>> >>> Vijay. >>> >>> >>> >>> >>> >>> >>> >>> On Sun, Apr 1, 2018 at 9:34 AM, Jack Hickish <[email protected]> >>> wrote: >>> >>>> Hi Vijay, >>>> >>>> Are you trying to black box a system generator model, or plain >>>> verilog/vhdl? In the latter case, any error in the HDL syntax or issues >>>> with port declarations will probably cause the tools to implode like you >>>> see. >>>> >>>> Do you still get this error with the latest (14.7) of the xilinx tools, >>>> and an appropriate version of Matlab (2013b would be ideal)? >>>> >>>> What version of mlib_devel are you using? >>>> >>>> Cheers >>>> Jack >>>> >>>> On Sun, Apr 1, 2018, 6:24 AM Vijay Kumar <[email protected]> >>>> wrote: >>>> >>>>> Dear Casperites, >>>>> >>>>> I am trying to run a simple model with a black box to see if I can get >>>>> an RTL to work with a Simulink model in the Casper flow. >>>>> >>>>> I am getting the following error at the very beginning of compilation. >>>>> Please see the following output. Appreciate your help to resolve this. >>>>> >>>>> Thanks a lot. >>>>> >>>>> Detected Linux OS >>>>> ############################# >>>>> ## System Update ## >>>>> ############################# >>>>> ############################# >>>>> ## Block objects creation ## >>>>> ############################# >>>>> ###################### >>>>> ## Checking objects ## >>>>> ###################### >>>>> Running system generator ... >>>>> Warning: Possible deprecated use of get on a Java object with an HG >>>>> Property 'UserData'. >>>>> > In xlNGCPostGeneration at 57 >>>>> In >>>>> /opt/Xilinx/14.4/ISE_DS/ISE/sysgen/bin/lin64/xlruntargetfcn.p>xlruntargetfcn >>>>> at 12 >>>>> In >>>>> /opt/Xilinx/14.4/ISE_DS/ISE/sysgen/bin/lin64/xlGenerateButton.p>xlGenerateButton >>>>> at 478 >>>>> In gen_xps_files at 323 >>>>> In casper_xps>run_Callback at 155 >>>>> In casper_xps at 88 >>>>> In @(hObject,eventdata)casper_xps('run_Callback',hObject,eventd >>>>> ata,guidata(hObject)) >>>>> Warning: Possible deprecated use of set on a Java object with an HG >>>>> Property 'UserData'. >>>>> > In xlNGCPostGeneration at 60 >>>>> In >>>>> /opt/Xilinx/14.4/ISE_DS/ISE/sysgen/bin/lin64/xlruntargetfcn.p>xlruntargetfcn >>>>> at 12 >>>>> In >>>>> /opt/Xilinx/14.4/ISE_DS/ISE/sysgen/bin/lin64/xlGenerateButton.p>xlGenerateButton >>>>> at 478 >>>>> In gen_xps_files at 323 >>>>> In casper_xps>run_Callback at 155 >>>>> In casper_xps at 88 >>>>> In @(hObject,eventdata)casper_xps('run_Callback',hObject,eventd >>>>> ata,guidata(hObject)) >>>>> XSG generation complete. >>>>> XSG generation complete. >>>>> ######################### >>>>> ## Copying base system ## >>>>> ######################### >>>>> Copying base package from: >>>>> /opt/mlib_devel/xps_base/XPS_ROACH2_base >>>>> ######################## >>>>> ## Copying custom IPs ## >>>>> ######################## >>>>> ########################## >>>>> ## Creating Simulink IP ## >>>>> ########################## >>>>> ########################## >>>>> ## Creating EDK files ## >>>>> ########################## >>>>> Running off sys_clk @100MHz >>>>> Running off sys_clk @100MHz >>>>> Running off sys_clk @100MHz >>>>> ######################### >>>>> ## Elaborating objects ## >>>>> ######################### >>>>> ############################## >>>>> ## Preparing software files ## >>>>> ############################## >>>>> ######################### >>>>> ## Running EDK backend ## >>>>> ######################### >>>>> Warning: File '/home/vijay/work/testing/blac >>>>> kboxcheck/testing1/XPS_ROACH2_base/implementation/system.bit' not >>>>> found. >>>>> > In gen_xps_files at 664 >>>>> In casper_xps>run_Callback at 155 >>>>> In casper_xps at 88 >>>>> In @(hObject,eventdata)casper_xps('run_Callback',hObject,eventd >>>>> ata,guidata(hObject)) >>>>> Warning: File '/home/vijay/work/testing/blac >>>>> kboxcheck/testing1/XPS_ROACH2_base/implementation/download.bit' not >>>>> found. >>>>> > In gen_xps_files at 665 >>>>> In casper_xps>run_Callback at 155 >>>>> In casper_xps at 88 >>>>> In @(hObject,eventdata)casper_xps('run_Callback',hObject,eventd >>>>> ata,guidata(hObject)) >>>>> xps -nw -scr run_xps.tcl system.xmp: Segmentation fault >>>>> Error using gen_xps_files (line 685) >>>>> XPS failed. >>>>> >>>>> >>>>> >>>>> -- >>>>> You received this message because you are subscribed to the Google >>>>> Groups "[email protected]" group. >>>>> To unsubscribe from this group and stop receiving emails from it, send >>>>> an email to [email protected]. >>>>> To post to this group, send email to [email protected]. >>>>> >>>> >>>> -- >>>> You received this message because you are subscribed to the Google >>>> Groups "[email protected]" group. >>>> To unsubscribe from this group and stop receiving emails from it, send >>>> an email to [email protected]. >>>> To post to this group, send email to [email protected]. >>>> >>> >>> >>> -- >>> You received this message because you are subscribed to the Google >>> Groups "[email protected]" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to [email protected]. >>> To post to this group, send email to [email protected]. >>> >>> >>> >>> -- >>> You received this message because you are subscribed to the Google >>> Groups "[email protected]" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to [email protected]. >>> To post to this group, send email to [email protected]. >>> >> >> >> -- >> You received this message because you are subscribed to the Google Groups >> "[email protected]" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> To post to this group, send email to [email protected]. >> >> >> >> -- >> You received this message because you are subscribed to the Google Groups >> "[email protected]" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> To post to this group, send email to [email protected]. >> > > <sinelut_config.m><sinelut.v><testing1.slx> > > > -- You received this message because you are subscribed to the Google Groups "[email protected]" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected].
