Hi David, I'll also add that later this week I'll be vetting all the snap tutorials for the workshop, so if there is an issue hopefully by the end of the week it'll be fixed.
Cheers Jack On Tue, 18 Sep 2018, 5:02 pm Brian Bradford, <[email protected]> wrote: > Hi David, > > Since you are new to CASPER, I would recommend following the instructions > located here: https://casper-toolflow.readthedocs.io/en/latest/index.html > , > as we recently attempted to update all documentation for new users. There > are also updated Tutorials located in this documentation, but here is the > direct link: Tutorials > <https://casper-tutorials.readthedocs.io/en/latest/> > > I have seen this exact error before when running Vivado 2017.2 and Matlab > R2016b. In short, my solution was installing Vivado 2016.4 instead as this > is the recommended Vivado version for SNAP. (Which can be seen in the setup > table here > <https://casper-toolflow.readthedocs.io/en/latest/index.html#setup>) I > also imagine you might need to install Matlab R2016b instead, but I would > attempt to use R2017b first and maybe let us know if it works without > issue... :) > > Please feel free to reach out with anymore questions you might have. > Feedback is also welcomed about the new documentation or if you should find > any errors. > > Cheers, > Brian Bradford > > > On Tue, Sep 18, 2018 at 6:40 PM David Marsh <[email protected]> wrote: > >> >> >> I am new to Casper so am beginning with the tutorials >> I followed the instructions on >> *https://casper.berkeley.edu/wiki/Casper_Caltech_Workshop_2017_Tutorials_Help_Page* >> <https://casper.berkeley.edu/wiki/Casper_Caltech_Workshop_2017_Tutorials_Help_Page> >> to >> set up the libraries and system generator. >> >> Then I opened up the SNAP tut_intro simulink design. When I try to run >> the design I get this error: >> "Part on the System Generator Token in your design is set to Kintex7 >> xc7k160t-2ffg676. This part is not found in your Vivado installation. >> Please modify the System Generator Token to a part that is currently >> installed or update Vivado by installing this part." >> >> If I delete the SNAP block and manually choose Kintex7 xc7k160t-2ffg676 >> in the System Generator Token, I am able to run the design without any >> errors. >> Also if I use the SNAP2 block, it runs without error. >> >> I am using a floating Vivado license that should have access to all the >> parts. I am using Matlab 2017b and Vivado 2017.4 >> Has anyone encountered this error or have any feedback? >> >> Thanks, >> David >> >> -- >> You received this message because you are subscribed to the Google Groups >> "[email protected]" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> To post to this group, send email to [email protected]. >> > > -- > You received this message because you are subscribed to the Google Groups " > [email protected]" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To post to this group, send email to [email protected]. > -- You received this message because you are subscribed to the Google Groups "[email protected]" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected].
