Hi Dan, That's great news re. the CASPER Yellow Blocks for the ZCU111 ADC. Does Wei have a github to share that? Or does he intend to make it available on the CASPER Github?
Thanks a million, Colm On Wed, 7 Oct 2020 at 02:59, Dan Werthimer <[email protected]> wrote: > > > hi jeb, > > regarding your ZCU111 RFDC question: > here's some info that might be helpful from wei liu, cc'ed on this. > btw, wei liu recently made casper yellow blocks for the ZCU111 ADC's. > he's now working on ZCU111 yellow blocks for 1, 10, and 100 Gbit > ethernet. > > > > from Wei Liu: > -------------------- > > I didn't get the keyError: ‘C_Sysref_Master’ before, > but I had the board locked up issue before. > > what I would suggest is > (1) check his block design in vivado and confirm the 'phys_addr' and > 'addr_range' > of RFDC core are correct. > When the 'phys_addr' was incorrect, and I was trying to configure the > RFDC core, I got my zcu111 locked up. > (2) make sure the data width of the HPM interface on the MPSOC core is > 128bits instead of 32bits. > I'm not sure whether his issue is caused by this setting, but the data > width should be 128bits. > All Xilinx IP cores with AXI4 interface have 32bits data width, so I set > the data width of HPM interface on MPSOC to 32bits, > but the system can't work until I change the data width to 128bits. > > Best, > Wei > > > > On Tue, Oct 6, 2020 at 6:12 PM Jeb Bailey <[email protected]> wrote: > >> Hi Lewis, >> While that does get rid of the sysref KeyError, executing >> overlay.usp_rf_data_converter_0 now locks up the whole board and I’m forced >> to power cycle. >> >> >> The contents of ol.ip_dict['usp_rf_data_converter_0’] are (excluding the >> parameters): >> >> {'addr_range': 262144, >> 'device': <pynq.pl_server.device.XlnkDevice at 0x7f922cd780>, >> 'driver': xrfdc.RFdc, >> 'fullpath': 'usp_rf_data_converter_0', >> 'gpio': {}, >> 'interrupts': {'irq': {'controller': 'axi_intc_0', >> 'fullpath': 'usp_rf_data_converter_0/irq', >> 'index': 3}}, >> 'mem_id': 's_axi', >> 'parameters': { ...}, >> 'phys_addr': 2684878848, >> 'registers': {}, >> 'state': None, >> 'type': 'xilinx.com:ip:usp_rf_data_converter:2.2'} >> >> >> I’m guessing you came by some of this based on >> https://discuss.pynq.io/t/zcu111-rfsoc-pynq-support-for-vivado-2019-1-hwh-files/685/4? >> >> >> Any more ideas? As I understand this the python code is depending on >> libxrfdc.so which, since I’m using the 2.5 board image was the result of >> either a 2018.3 or 2019.1 petalinux tool flow run. >> >> -Jeb >> >> >> >> On Oct 6, 2020, at 1:42 PM, 'Lewis McLaughlin' via >> [email protected] <[email protected]> wrote: >> >> Hi Jeb, >> >> A workaround you can do is to edit the file >> "/usr/local/lib/python3.6/dist-packages/xrfdc/config.py" on the board. >> >> Comment out lines 46,47,60,90,91. These relate to: >> >> _DAC_DDP: FifoEnable, AdderEnable >> >> _ADC_DDP: FifoEnable >> >> Config: MasterADCTile, MasterDACTile >> >> Hopefully that works for your problem! >> >> Regards, >> Lewis. >> >> On Tue, 6 Oct 2020, 21:27 Jeb Bailey, <[email protected]> wrote: >> >>> Hi Folks, >>> Has anyone here had any success configuring the RFDC block from python >>> using pynq with a bitstream built in Vivado 2019.2? >>> >>> I’m working with the 2.5 ZCU111 SD image with pynq updated to 2.5.4. By >>> using >>> ignore_version=True with loading the overlay I can get the xrfdc driver >>> loaded, however trying to access the block via attributes (e.g. >>> myoverlay.usp_rf_data_converter_0 >>> raises a KeyError: ‘C_Sysref_Master’). >>> >>> My sinking suspicion is that I need to rebuild the pynq SDimage with the >>> 2019.2 >>> tool flow but I'm getting the impression this is also a bit of a >>> minefield, so if anyone as insight on this process (or with 2020.1) I’d be >>> interested here as well. >>> >>> Cheers and thanks. >>> >>> -Jeb >>> >>> —— >>> Dr. J.I. Bailey, III (Jeb) / Project Scientist >>> Mazin Lab <http://web.physics.ucsb.edu/~bmazin/> / Department of >>> Physics, UCSB >>> jebbailey.com / +1 (734) 389-5143 / skype:spacecolonyone >>> >>> >>> -- >>> You received this message because you are subscribed to the Google >>> Groups "[email protected]" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to [email protected]. >>> To view this discussion on the web visit >>> https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/00AC3517-ABAF-4C82-8D87-92610569B96A%40ucsb.edu >>> <https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/00AC3517-ABAF-4C82-8D87-92610569B96A%40ucsb.edu?utm_medium=email&utm_source=footer> >>> . >>> >> >> -- >> You received this message because you are subscribed to the Google Groups >> "[email protected]" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> To view this discussion on the web visit >> https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/CAMakDon_nwa2i%3DcN9Eh6RjSHgnk0fC%3DBSZwk9Yh%2B5Ag_J%2B_xwg%40mail.gmail.com >> <https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/CAMakDon_nwa2i%3DcN9Eh6RjSHgnk0fC%3DBSZwk9Yh%2B5Ag_J%2B_xwg%40mail.gmail.com?utm_medium=email&utm_source=footer> >> . >> >> >> -- >> You received this message because you are subscribed to the Google Groups >> "[email protected]" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> To view this discussion on the web visit >> https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/EF47434F-9A78-44E6-87D2-8460EF8F548A%40ucsb.edu >> <https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/EF47434F-9A78-44E6-87D2-8460EF8F548A%40ucsb.edu?utm_medium=email&utm_source=footer> >> . >> > -- > You received this message because you are subscribed to the Google Groups " > [email protected]" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/CAGHS_vHp%3Db%3Dh6_6gb91Giqc8Of3LquCXtWdadPYftkqYsryYgg%40mail.gmail.com > <https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/CAGHS_vHp%3Db%3Dh6_6gb91Giqc8Of3LquCXtWdadPYftkqYsryYgg%40mail.gmail.com?utm_medium=email&utm_source=footer> > . > -- *Dr Colm Bracken* Lecturer Maynooth University Experimental Physics Maynooth University, Maynooth, Co. Kildare, Ireland. T: +353 1 708 3641 E: [email protected] W: www.maynoothuniversity.ie Follow my work on https://nuim.academia.edu/ColmBracken And Research Associate Astronomy & Astrophysics Section School of Cosmic Physics Dublin Institute for Advanced Studies 31 Fitzwilliam Place Dublin 2, D02 XF86 T: +353 1 440 6656 ext 352 E: [email protected] W: www.dias.ie/2017/06/22/dr-colm-bracken Follow my work on https://nuim.academia.edu/ColmBracken -- You received this message because you are subscribed to the Google Groups "[email protected]" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/CAEx9wh-Q2nEG8LYF5gx9SLZx_n7mK7r5S7s49giWbCvvuOfZ5g%40mail.gmail.com.
