Hi Wei, Is there any chance this workaround is related to needing cpu.idle=1 on your kernel command line? I know trying to use the system ilas will cause the PS side to hang without it.
-Jeb Sent from my mobile. > On Nov 2, 2020, at 15:57, Wei Liu <[email protected]> wrote: > > > Hi Casperites, > > I'm working on porting casper toolflow on ZCU111. > I want to share some debugging experiences, which may be helpful. > > We have PYNQ image running on the PS part, which is based on Ubuntu18.04. > > I found PL registers can't be accessed after the bit file is downloaded via > JTAG. > Because PYNQ image is running, SDK can't be used for debugging and no elf > file is associated, > which causes some initialization unfinished. > > What I did is download the bit file via JTAG first, so we have the GUI for > debugging. > Then I downloaded the same bit file via Overlay class from PYNQ, which can > finish the necessary initialization. > After that, I can monitor signals from the vivado hardware manager, and I can > also read or write PL registers. > > Hope this will be helpful for debugging on MPSOC with PYNQ image. > > Best, > Wei > -- > You received this message because you are subscribed to the Google Groups > "[email protected]" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/CAFRG3zSgUTvd-dQvvaD-x3i2kERqjuf8-P-TBEj0%2B1tKQcFJtA%40mail.gmail.com. -- You received this message because you are subscribed to the Google Groups "[email protected]" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/E1B2A77B-57C1-4F59-AD57-2691FB351869%40ucsb.edu.
