Hi Jeff,I have one more suggestion that might help. When your python installation(s) become more complicated, sometimes the seemingly simple command "pip" or "pip3" doesn't do what you expect. It can install packages or search for dependencies in directories that you don't expect (not matching the python installation / environment that you intend to install packages). I have found helpful to use the command$ python -m pip <install / uninstall / show ...>instead of $ pip <install / uninstall / show ...> In my experience, this command format has allowed pip to search dependencies and install packages to the intended python (the same python referred to by "python" in the command line). Cheers,Spiro On Tue, 2021-05-04 at 22:06 +0200, Adam Isaacson wrote: > Hi Jeff, > Please see my feedback in red below. > > Kind regards, > > Adam Isaacson > South African Radio Astronomy Observatory (SARAO) > Hardware Manager > Cell: (+27) 825639602 > Tel: (+27) 215067300 > email: aisaac...@ska.ac.za > > > > On Tue, May 4, 2021 at 4:34 PM 'Kobesky, Jeffrey CIV USN NRL (5555) Washington > DC (USA)' via casper@lists.berkeley.edu <casper@lists.berkeley.edu> wrote: > > > > > > > > > > > > > > Hello CASPER, > > > > > > > > I thought I had the Python stuff figured out, but turns out I'm completely > > lost. > > AI: No worries, there is still plenty that I don't understand :). > > > > > > I followed the instructions on this page: > > https://casper-toolflow.readthedocs.io/en/latest/src/How-to-install-casperfpga.html > > > > > > > > I did both the upper set of instructions using pip, and the lower set of > > instructions using the "traditional method". Both result in errors in the > > third set of > > instructions using ipython. Am I supposed to do these steps in the vitual > > python environment casp-venv, or in non-virtual environment, or does it > > matter. I've actually tried both, and neither works for me. > > AI: It all depends on which repo and branch you are using. Maybe specify the > repo and branch. It looks like you are using casper-astro/casperfpga repo, but > I could be wrong. There is a python 3 branch, which is not supported for the > SKARAB and the python 2 branch, which is supported for SKARAB and SARAO uses > that. Personally, I use a virtual environment (Python 3.5) for the toolflow > and no virtual environment for casperpfga (python 2.7). I haven't tested all > the permutations, but I know that works for me. > > > > > > In the first set of instructions using pip, should I be using pip or pip3? > > AI: Once again pip is for python 2.7 and above. Pip3 is for python 3.5 and > above. If the branch you are using has "py3" in the name then you will need > pip3. All the other branches use Python 2.7 and so pip is fine. > > > > > > > > Some possible clues: > > > > > > > > (casper_venv) labrat@pop-os:~$ python --version Python 3.6.9 > > > > (casper_venv) labrat@pop-os:~$ pip --version pip 9.0.1 from > > /home/labrat/casper_venv/lib/python3.6/site-packages (python 3.6) > > > > (casper_venv) labrat@pop-os:~$ deactivate labrat@pop-os:~$ python --version > > Python 3.6.9 labrat@pop-os:~$ pip --version pip 9.0.1 from > > /usr/lib/python2.7/dist-packages > > (python 2.7) > > AI: These versions should work, but I haven't tested on them. I think my pip > version was 8.1, Python 3.5 and Python 2.7. > > > > > > The closest I got in ipython, I think, yielded this (which is probably wrong > > version, but at least no errors): > > > > > > > > In [1]: import casperfpga > > > > > > > > In [2]: casperfpga.__version__ > > > > Out[2]: '0.0+unknown.202105040928' > > AI: It looked like it has installed correctly. Don't worry too much about the > "unknown" version. We have a ska-sa/casperfpga repo and the branch is devel. > if you install this casperfpga version then you won't see the "unknown" in the > field. I think once we have merged our changes into the casper-astro/ > casperfpga repo then this field will be populated. Do you have a board that > you can connect to? Have you tried reading and writing registers? That is the > true test. > > > > > > Sorry for the discombobulated post, but I think there must be something > > basic I’m just not understanding. > > AI: Please also send screen captures of the install errors - helps with the > debugging. > > > > Thanks -- Jeff > > > > From: Adam Isaacson <aisaac...@ska.ac.za> > > > > > > Sent: Friday, April 16, 2021 5:18 AM > > > > To: Casper Lists <casper@lists.berkeley.edu> > > > > Subject: Re: [casper] python version for casperfpga > > > > > > Hi Jeff, > > > > > > > > > > This is great information. We had a recent "wheel" support request and it > > turns out it is not needed, but nice that you figured out how to install it. > > This should be added to our readthedocs. > > > > > > > > > > > > Thanks Jeff! Let me know how the SKARAB and Red Pitaya testing goes. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Kind regards, > > > > > > > > > > > > Adam Isaacson > > > > > > South African Radio Astronomy Observatory (SARAO) > > > > > > Hardware Manager > > > > > > Cell: (+27) 825639602 > > > > > > Tel: (+27) 215067300 > > > > > > email: > > aisaac...@ska.ac.za > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On Thu, Apr 15, 2021 at 10:26 PM 'Kobesky, Jeffrey CIV USN NRL (5555) > > Washington DC (USA)' via > > casper@lists.berkeley.edu <casper@lists.berkeley.edu> wrote: > > > > > > > > Hello CASPER, > > > > > > > > > FYI, I ran into slight issue “building wheel” during: (casper_venv) > > > ~/mlib_devel$ pip3 install –r > > > requirements.txt > > > > > > See RED text in attached screenshot. But I believe everything installed, > > > even with the two errors. > > > > > > Anyway, I believe error was caused because “wheel” was not part of my > > > python installation. > > > > > > > > > I did: (casper_venv) $ sudo apt install python-wheel-common > > > > > > Then re-ran (casper_venv) ~/mlib_devel$ pip3 install –r requirements.txt > > > , no wheel errors. > > > > > > > > > Hope this helps someone. – Jeff > > > > > > Jeffrey Kobesky > > > Electronics Engineer > > > Naval Research Laboratory > > > O: (202) 404-7109 > > > M: (443) 243-1554 > > > OS: Pop!_OS 18.04 LTS (derived from Ubuntu 18.04 LTS) > > > Vivado 19.1.1 > > > MATLAB 2018a > > > mlib_devel branch: master > > > Python 2.7 and 3.6, running in (casper_venv) > > > Devices: Red Pitaya, SKARAB > > > > > > > > > From: Adam Isaacson <aisaac...@ska.ac.za> > > > > > > > > > Sent: Thursday, April 15, 2021 3:53 AM > > > > > > To: Casper Lists <casper@lists.berkeley.edu> > > > > > > Subject: Re: [casper] python version for casperfpga > > > > > > > > > Hi Jeff, > > > > > > > > > > > > > > > Well done on solving your problem. I must say I missed the single > > > underscore completely :). It is wonderful when casperites solve their own > > > problems :). > > > > > > > > > > > > > > > > > > Yes, please keep me posted on Pop OS! or Pop!_OS. I had to look that up to > > > be honest. I see it is indeed derived from Ubuntu 18.04LTS. If it works > > > then we will update the documentation > > > - this is what CASPER is about = collaboration! > > > > > > > > > > > > > > > > > > Great to have your energies Jeff. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Kind regards, > > > > > > > > > > > > > > > > > > Adam Isaacson > > > > > > > > > South African Radio Astronomy Observatory (SARAO) > > > > > > > > > Hardware Manager > > > > > > > > > Cell: (+27) 825639602 > > > > > > > > > Tel: (+27) 215067300 > > > > > > > > > email: > > > aisaac...@ska.ac.za > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On Wed, Apr 14, 2021 at 5:19 PM 'Kobesky, Jeffrey CIV USN NRL (5555) > > > Washington DC (USA)' via > > > casper@lists.berkeley.edu <casper@lists.berkeley.edu> wrote: > > > > > > > > > > > All good info, please keep hijacking > > > > J > > > > > > > > I do want to add to the original post. I figured out the original error > > > > I got was because I used single > > > > underscores (casperfpga._version_) instead of double underscores > > > > (casperfpga.__version__) in ipython. It’s always the mundane details > > > > that get me. But now at least I do understand the Python virtual > > > > environment which I’ve never used before but seems like > > > > a good idea. > > > > > > > > Also, Adam, my operating system is Pop OS! 18.04 - which was derived > > > > from Ubuntu 18.04 - so I’ll report > > > > back on the SKARAB/Red Pitaya under that operating system. > > > > > > > > Thanks again – jeff. > > > > > > > > Jeffrey Kobesky > > > > Electronics Engineer > > > > Naval Research Laboratory > > > > O: (202) 404-7109 > > > > M: (443) 243-1554 > > > > > > > > From: Adam Isaacson <aisaac...@ska.ac.za> > > > > > > > > > > > > Sent: Wednesday, April 14, 2021 4:23 AM > > > > > > > > To: Casper Lists <casper@lists.berkeley.edu> > > > > > > > > Subject: Re: [casper] python version for casperfpga > > > > > > > > > > > > Hi Jeff and everyone, > > > > > > > > > > > > > > > > > > > > While we are hacking Jeff's thread (apologies, but this will be useful > > > > info), please note that our toolflow only supports the following Red > > > > Pitaya devices: STEMlab125-10 (10 bit > > > > ADC and DAC) and STEMlab125-14 (14 bit ADC and DAC). There are another > > > > three Red Pitaya boards that we don't support yet - check out: > > > > > > > > > > > > > > > > > > > > > > > > 1) CASPER Hardware: > > > > https://github.com/casper-astro/casper-hardware#casper-hardware > > > > > > > > > > > > 2) Red Pitaya Hardware comparison: > > > > https://redpitaya.readthedocs.io/en/latest/developerGuide/125-10/vs.html > > > > > > > > > > > > > > > > > > > > > > > > > > > > We encourage anyone who would like to add these boards to the toolflow > > > > and we are happy to support you in the process. I highly recommend > > > > attending the Hardware Porting Workshops > > > > that explain how to use the toolflow for development and target new > > > > hardware. The next Hardware Porting Workshop is likely to be next year, > > > > but an email will be sent out with these details once defined. > > > > > > > > > > > > > > > > > > > > > > > > Just a reminder of our CASPER conference that is taking place the week > > > > of the 17th May via Zoom and is completely free! If interested please > > > > check out: > > > > > > > > > > > > > > > > > > > > > > > > https://casper.berkeley.edu/index.php/meetings-workshops/ > > > > > > > > > > > > > > > > > > > > > > > > Sorry for the additional advertising! ;) > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Kind regards, > > > > > > > > > > > > > > > > > > > > > > > > Adam Isaacson > > > > > > > > > > > > South African Radio Astronomy Observatory (SARAO) > > > > > > > > > > > > Hardware Manager > > > > > > > > > > > > Cell: (+27) 825639602 > > > > > > > > > > > > Tel: (+27) 215067300 > > > > > > > > > > > > email: > > > > aisaac...@ska.ac.za > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On Wed, Apr 14, 2021 at 8:02 AM Morag Brown <mbr...@ska.ac.za> wrote: > > > > > > > > > Hi all, > > > > > > > > > > > > > > > > > > > > > > > > > To add to Amish's info, for ease of access, the design files for said > > > > > projects can be found here. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Morag > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > (Sorry Jeffrey!) > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On Wed, Apr 14, 2021 at 7:55 AM Amish Patel <apa...@ska.ac.za> wrote: > > > > > > > > > > > Xin chào, Hien, > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > CASPER's Tutorials have three small projects that use the Red Pitaya > > > > > > with the > > > > > > CASPER toolflow. First, you will need to do some > > > > > > general setup for the Red Pitaya, and (if necessary) install > > > > > > casperfpga on a machine you plan on using to interface with it. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Please do let us know if this is what you are looking for, and/or if > > > > > > you have any questions once you're working through it. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Regards > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Amish Patel > > > > > > > > > > > > SARAO > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > (Apologies to Jeffrey for hijacking your thread!) > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On Wed, 14 Apr 2021 at 04:20, Hien Vo Bich <hien...@vgu.edu.vn> > > > > > > wrote: > > > > > > > > > > > > > Greeting > > > > > > > > > > > > > > Can any one point out the link to some small projects that use the > > > > > > > Red Pitya board with the CASPER flow ? > > > > > > > > > > > > > > > > > > > > > Regards > > > > > > > > > > > > > > > > > > > > > Hien Vo > > > > > > > > > > > > > > > > > > > > > Vietnamese German University > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On Tue, Apr 13, 2021 at 9:59 PM Adam Isaacson <aisaac...@ska.ac.za > > > > > > > > wrote: > > > > > > > > > > > > > > > Hi Jeff, > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > The toolflow is normally used with a Python virtual environment > > > > > > > > setup with Python 3. The casperfpga tool (provides comms to the > > > > > > > > board) uses just python 2.7. This is the way we use > > > > > > > > the toolflow and casperpfga at SARAO (South African Radio > > > > > > > > Astronomy Observatory). We support the SKARAB and Red Pitaya. > > > > > > > > There are Python 3 versions for casperfpga, but we haven't > > > > > > > > really tested these on the SKARAB or Red Pitaya. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > I have been using Ubuntu 16.04LTS, but I know this also works on > > > > > > > > Ubuntu 18.04LTS. I still need to test my SKARAB on Ubuntu > > > > > > > > 18.04LTS, which I will do in the next couple of weeks. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Here is some documentation to install the toolflow on your > > > > > > > > system and explains the virtual environment: > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > https://casper-toolflow.readthedocs.io/en/latest/src/Installing-the-Toolflow.html > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Here is some documentation to install casperfpga on your > > > > > > > > system: > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > https://casper-toolflow.readthedocs.io/projects/casperfpga/en/latest/How-to-install-casperfpga.html > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Here are the ska-sa (SARAO) repos which has the latest for > > > > > > > > SKARAB and Red Pitaya: > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > 1) https://github.com/ska-sa/casperfpga/tree/devel (casperfpga) > > > > > > > > > > > > > > > > > > > > > > > > 2) https://github.com/ska-sa/mlib_devel/tree/devel (toolflow) > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Here are the casper-astro repos, which the majority of the > > > > > > > > CASPER community uses: > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > 1) https://github.com/casper-astro/mlib_devel - this actually > > > > > > > > does work with the SKARAB and Red Pitaya too. > > > > > > > > You still need a Python 3 virtual environment if your default > > > > > > > > python package is 2.7. > > > > > > > > > > > > > > > > > > > > > > > > 2) https://github.com/casper-astro/casperfpga - this should work > > > > > > > > with SKARAB and Red Pitaya too (Python > > > > > > > > 2.7) > > > > > > > > > > > > > > > > > > > > > > > > 3) https://github.com/casper-astro/casperfpga/tree/py3-merge - > > > > > > > > this works with SNAP, but > > > > > > > > I haven't tested it on SKARAB or the Red Pitaya. It may work on > > > > > > > > the Red Pitaya, but I believe there are still issues with SKARAB > > > > > > > > (Python 3) > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > I hope this helps! > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Kind regards, > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Adam Isaacson > > > > > > > > > > > > > > > > > > > > > > > > South African Radio Astronomy Observatory (SARAO) > > > > > > > > > > > > > > > > > > > > > > > > Hardware Manager > > > > > > > > > > > > > > > > > > > > > > > > Cell: (+27) 825639602 > > > > > > > > > > > > > > > > > > > > > > > > Tel: (+27) 215067300 > > > > > > > > > > > > > > > > > > > > > > > > email: > > > > > > > > aisaac...@ska.ac.za > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On Tue, Apr 13, 2021 at 4:36 PM 'Kobesky, Jeffrey CIV USN NRL > > > > > > > > (5555) Washington DC (USA)' via > > > > > > > > casper@lists.berkeley.edu <casper@lists.berkeley.edu> wrote: > > > > > > > > > > > > > > > > > > > > > > > > > > Hello CASPER, > > > > > > > > > > > > > > > > > > I’m installing tool flow and am confused about which python > > > > > > > > > version to use for casperfpga. I have both python 2.7 and 3.6 > > > > > > > > > on my machine. > > > > > > > > > > > > > > > > > > For my equipment (red pitaya and skarab) this link > > > > > > > > > https://casper-toolflow.readthedocs.io/en/latest/ says to use > > > > > > > > > python3. But if I follow the steps in this link > > > > > > > > > > > > > > > > > > https://casper-toolflow.readthedocs.io/en/latest/src/How-to-install-casperfpga.html > > > > > > > > > then casperfpga gets installed under the python 2.7 > > > > > > > > > folder. > > > > > > > > > > > > > > > > > > > > > > > > > > > This leads to errors (for example, I get error doing > > > > > > > > > “casperfpga._version_” in ipython), but I think I can clear > > > > > > > > > those errors by reconfiguring python versioning on my machine. > > > > > > > > > > > > > > > > > > For now, big picture questions are: Should we really be using > > > > > > > > > python3 for casperfpga with red pitaya and skarab? If so is > > > > > > > > > there a script available that would install casperfpga > > > > > > > > > in the correct python3 folder? I’ve looked in the email > > > > > > > > > archives but can’t find answers. > > > > > > > > > > > > > > > > > > Thanks! -- Jeff > > > > > > > > > > > > > > > > > > Jeffrey Kobesky > > > > > > > > > Electronics Engineer > > > > > > > > > Naval Research Laboratory > > > > > > > > > O: (202) 404-7109 > > > > > > > > > M: (443) 243-1554 > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > -- > > > > > > > > > > > > > > > > > > > > > > > > > > > You received this message because you are subscribed to the > > > > > > > > > Google Groups "casper@lists.berkeley.edu" group. > > > > > > > > > > > > > > > > > > To unsubscribe from this group and stop receiving emails from > > > > > > > > > it, send an email to > > > > > > > > > casper+unsubscr...@lists.berkeley.edu. > > > > > > > > > > > > > > > > > > To view this discussion on the web visit > > > > > > > > > https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/cfbc6d4fdd764eac96224b1df77016aa%40nrl.navy.mil. > > > > > > > > > > > > > > > > -- > > > > > > > > > > > > > > > > > > > > > > > > You received this message because you are subscribed to the > > > > > > > > Google Groups "casper@lists.berkeley.edu" group. > > > > > > > > > > > > > > > > To unsubscribe from this group and stop receiving emails from > > > > > > > > it, send an email to > > > > > > > > casper+unsubscr...@lists.berkeley.edu. > > > > > > > > > > > > > > > > To view this discussion on the web visit > > > > > > > > https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/CADTJ%3DnHqgYbkB2eymR-Vf6k6Lsug-YS14TZfPYEMhZKBx-yMFw%40mail.gmail.com. > > > > > > > > > > > > > > -- > > > > > > > > > > > > > > > > > > > > > You received this message because you are subscribed to the Google > > > > > > > Groups "casper@lists.berkeley.edu" group. > > > > > > > > > > > > > > To unsubscribe from this group and stop receiving emails from it, > > > > > > > send an email to > > > > > > > casper+unsubscr...@lists.berkeley.edu. > > > > > > > > > > > > > > To view this discussion on the web visit > > > > > > > https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/CAA1FmcVt_3MPVjKAkQYBX_24CsmiKfdxOc1eHFamgp6eBHg9tg%40mail.gmail.com. > > > > > > > > > > > > -- > > > > > > > > > > > > > > > > > > You received this message because you are subscribed to the Google > > > > > > Groups "casper@lists.berkeley.edu" group. > > > > > > > > > > > > To unsubscribe from this group and stop receiving emails from it, > > > > > > send an email to > > > > > > casper+unsubscr...@lists.berkeley.edu. > > > > > > > > > > > > To view this discussion on the web visit > > > > > > https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/CANfrX%3D-6yyQmsucSQq1tBje1NK0-gW5UBBb-FcXopnEheUJV0A%40mail.gmail.com. > > > > > > > > > > -- > > > > > > > > > > > > > > > You received this message because you are subscribed to the Google > > > > > Groups "casper@lists.berkeley.edu" group. > > > > > > > > > > To unsubscribe from this group and stop receiving emails from it, send > > > > > an email to > > > > > casper+unsubscr...@lists.berkeley.edu. > > > > > > > > > > To view this discussion on the web visit > > > > > https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/CAGH-0Ten_ArBh4sZFk3CORQ1%3DyjmN1sUDjTrFmD%2BqygWgpL-4g%40mail.gmail.com. > > > > > > > > -- > > > > > > > > > > > > You received this message because you are subscribed to the Google > > > > Groups "casper@lists.berkeley.edu" group. > > > > > > > > To unsubscribe from this group and stop receiving emails from it, send > > > > an email to > > > > casper+unsubscr...@lists.berkeley.edu. > > > > > > > > To view this discussion on the web visit > > > > https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/CADTJ%3DnFuovuKfhXyorBYBFoRmu3uaqX2WmUvbB6upwSJJO%2B5Gg%40mail.gmail.com. > > > > > > > > > > > > -- > > > > > > > > > > > > You received this message because you are subscribed to the Google > > > > Groups "casper@lists.berkeley.edu" group. > > > > > > > > To unsubscribe from this group and stop receiving emails from it, send > > > > an email to > > > > casper+unsubscr...@lists.berkeley.edu. > > > > > > > > To view this discussion on the web visit > > > > https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/f7509c2d17ef42728a32cd8798f1760a%40nrl.navy.mil. > > > > > > -- > > > > > > > > > You received this message because you are subscribed to the Google Groups > > > "casper@lists.berkeley.edu" group. > > > > > > To unsubscribe from this group and stop receiving emails from it, send an > > > email to > > > casper+unsubscr...@lists.berkeley.edu. > > > > > > To view this discussion on the web visit > > > https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/CADTJ%3DnEmwG2b%2BhLB1yzG1r2ozO3Wsu6y9-7ZeG9VgaiakLYkEw%40mail.gmail.com. > > > > > > > > > -- > > > > > > You received this message because you are subscribed to the Google Groups > > > "casper@lists.berkeley.edu" group. > > > > > > To unsubscribe from this group and stop receiving emails from it, send an > > > email to > > > casper+unsubscr...@lists.berkeley.edu. > > > > > > To view this discussion on the web visit > > > https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/d9c0293ec0964faba1aed378bf0ba8c1%40nrl.navy.mil. > > > > -- > > > > You received this message because you are subscribed to the Google Groups " > > casper@lists.berkeley.edu" group. > > > > To unsubscribe from this group and stop receiving emails from it, send an > > email to > > casper+unsubscr...@lists.berkeley.edu. > > > > To view this discussion on the web visit > > https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/CADTJ%3DnEx52o0ycO7a5g4fQY%2B-GaXOQ1kNV1DRGPjUtEO%3DQnzjQ%40mail.gmail.com. > > > > > > > > > > > >
-- You received this message because you are subscribed to the Google Groups "casper@lists.berkeley.edu" group. To unsubscribe from this group and stop receiving emails from it, send an email to casper+unsubscr...@lists.berkeley.edu. To view this discussion on the web visit https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/b8670fef00621fc2ab3f4f2c2aa1235334dc04d1.camel%40gmail.com.
