Hi Jeff, This is great information. We had a recent "wheel" support request and it turns out it is not needed, but nice that you figured out how to install it. This should be added to our readthedocs.
Thanks Jeff! Let me know how the SKARAB and Red Pitaya testing goes. Kind regards, Adam Isaacson South African Radio Astronomy Observatory (SARAO) Hardware Manager Cell: (+27) 825639602 Tel: (+27) 215067300 email: aisaac...@ska.ac.za On Thu, Apr 15, 2021 at 10:26 PM 'Kobesky, Jeffrey CIV USN NRL (5555) Washington DC (USA)' via casper@lists.berkeley.edu < casper@lists.berkeley.edu> wrote: > Hello CASPER, > > > > FYI, I ran into slight issue “building wheel” during: (casper_venv) > ~/mlib_devel$ pip3 install –r requirements.txt > > > > See RED text in attached screenshot. But I believe everything installed, > even with the two errors. > > > > Anyway, I believe error was caused because “wheel” was not part of my > python installation. > > > > I did: (casper_venv) $ sudo apt install python-wheel-common > > > > Then re-ran (casper_venv) ~/mlib_devel$ pip3 install –r requirements.txt > , no wheel errors. > > > > Hope this helps someone. – Jeff > > > > Jeffrey Kobesky > > Electronics Engineer > > Naval Research Laboratory > > O: (202) 404-7109 > > M: (443) 243-1554 > > OS: Pop!_OS 18.04 LTS (derived from Ubuntu 18.04 LTS) > > Vivado 19.1.1 > > MATLAB 2018a > > mlib_devel branch: master > > Python 2.7 and 3.6, running in (casper_venv) > > Devices: Red Pitaya, SKARAB > > > > > > *From:* Adam Isaacson <aisaac...@ska.ac.za> > *Sent:* Thursday, April 15, 2021 3:53 AM > *To:* Casper Lists <casper@lists.berkeley.edu> > *Subject:* Re: [casper] python version for casperfpga > > > > Hi Jeff, > > > > Well done on solving your problem. I must say I missed the single > underscore completely :). It is wonderful when casperites solve their own > problems :). > > > > Yes, please keep me posted on Pop OS! or Pop!_OS. I had to look that up to > be honest. I see it is indeed derived from Ubuntu 18.04LTS. If it works > then we will update the documentation - this is what CASPER is about = > collaboration! > > > > Great to have your energies Jeff. > > > Kind regards, > > > > Adam Isaacson > > South African Radio Astronomy Observatory (SARAO) > > Hardware Manager > > Cell: (+27) 825639602 > > Tel: (+27) 215067300 > > email: aisaac...@ska.ac.za > > > > > > On Wed, Apr 14, 2021 at 5:19 PM 'Kobesky, Jeffrey CIV USN NRL (5555) > Washington DC (USA)' via casper@lists.berkeley.edu < > casper@lists.berkeley.edu> wrote: > > All good info, please keep hijacking J > > > > I do want to add to the original post. I figured out the original error I > got was because I used single underscores (casperfpga._version_) instead of > double underscores (casperfpga.__version__) in ipython. It’s always the > mundane details that get me. But now at least I do understand the Python > virtual environment which I’ve never used before but seems like a good idea. > > > > Also, Adam, my operating system is Pop OS! 18.04 - which was derived from > Ubuntu 18.04 - so I’ll report back on the SKARAB/Red Pitaya under that > operating system. > > > > Thanks again – jeff. > > > > Jeffrey Kobesky > > Electronics Engineer > > Naval Research Laboratory > > O: (202) 404-7109 > > M: (443) 243-1554 > > > > *From:* Adam Isaacson <aisaac...@ska.ac.za> > *Sent:* Wednesday, April 14, 2021 4:23 AM > *To:* Casper Lists <casper@lists.berkeley.edu> > *Subject:* Re: [casper] python version for casperfpga > > > > Hi Jeff and everyone, > > > > While we are hacking Jeff's thread (apologies, but this will be useful > info), please note that our toolflow only supports the following Red Pitaya > devices: STEMlab125-10 (10 bit ADC and DAC) and STEMlab125-14 (14 bit ADC > and DAC). There are another three Red Pitaya boards that we don't support > yet - check out: > > > > 1) CASPER Hardware: > https://github.com/casper-astro/casper-hardware#casper-hardware > > 2) Red Pitaya Hardware comparison: > https://redpitaya.readthedocs.io/en/latest/developerGuide/125-10/vs.html > > > > We encourage anyone who would like to add these boards to the toolflow and > we are happy to support you in the process. I highly recommend attending > the Hardware Porting Workshops that explain how to use the toolflow for > development and target new hardware. The next Hardware Porting Workshop is > likely to be next year, but an email will be sent out with these details > once defined. > > > > Just a reminder of our CASPER conference that is taking place the week of > the 17th May via Zoom and is completely free! If interested please check > out: > > > > https://casper.berkeley.edu/index.php/meetings-workshops/ > > > > Sorry for the additional advertising! ;) > > > Kind regards, > > > > Adam Isaacson > > South African Radio Astronomy Observatory (SARAO) > > Hardware Manager > > Cell: (+27) 825639602 > > Tel: (+27) 215067300 > > email: aisaac...@ska.ac.za > > > > > > On Wed, Apr 14, 2021 at 8:02 AM Morag Brown <mbr...@ska.ac.za> wrote: > > Hi all, > > > > To add to Amish's info, for ease of access, the design files for said > projects can be found here > <https://github.com/casper-astro/tutorials_devel/tree/master/red_pitaya>. > > > > Morag > > > > (Sorry Jeffrey!) > > > > On Wed, Apr 14, 2021 at 7:55 AM Amish Patel <apa...@ska.ac.za> wrote: > > Xin chào, Hien, > > > > CASPER's Tutorials > <https://casper-toolflow.readthedocs.io/projects/tutorials/en/latest/> have > three small projects that use the Red Pitaya with the CASPER toolflow. > First, you will need to do some general setup > <https://casper-toolflow.readthedocs.io/projects/tutorials/en/latest/tutorials/redpitaya/red_pitaya_setup.html> > for > the Red Pitaya, and (if necessary) install casperfpga on a machine you plan > on using to interface with it. > > > > Please do let us know if this is what you are looking for, and/or if you > have any questions once you're working through it. > > > Regards > > > > Amish Patel > > SARAO > > > > (Apologies to Jeffrey for hijacking your thread!) > > > > > > On Wed, 14 Apr 2021 at 04:20, Hien Vo Bich <hien...@vgu.edu.vn> wrote: > > Greeting > > Can any one point out the link to some small projects that use the Red > Pitya board with the CASPER flow ? > > Regards > > Hien Vo > > Vietnamese German University > > > > On Tue, Apr 13, 2021 at 9:59 PM Adam Isaacson <aisaac...@ska.ac.za> wrote: > > Hi Jeff, > > > > The toolflow is normally used with a Python virtual environment setup with > Python 3. The casperfpga tool (provides comms to the board) uses just > python 2.7. This is the way we use the toolflow and casperpfga at SARAO > (South African Radio Astronomy Observatory). We support the SKARAB and Red > Pitaya. There are Python 3 versions for casperfpga, but we haven't really > tested these on the SKARAB or Red Pitaya. > > > > I have been using Ubuntu 16.04LTS, but I know this also works on Ubuntu > 18.04LTS. I still need to test my SKARAB on Ubuntu 18.04LTS, which I will > do in the next couple of weeks. > > > > Here is some documentation to install the toolflow on your system and > explains the virtual environment: > > > > > https://casper-toolflow.readthedocs.io/en/latest/src/Installing-the-Toolflow.html > > > > Here is some documentation to install casperfpga on your system: > > > > > https://casper-toolflow.readthedocs.io/projects/casperfpga/en/latest/How-to-install-casperfpga.html > > > > Here are the ska-sa (SARAO) repos which has the latest for SKARAB and Red > Pitaya: > > > > 1) https://github.com/ska-sa/casperfpga/tree/devel (casperfpga) > > 2) https://github.com/ska-sa/mlib_devel/tree/devel (toolflow) > > > > Here are the casper-astro repos, which the majority of the CASPER > community uses: > > > > 1) https://github.com/casper-astro/mlib_devel - this actually does work > with the SKARAB and Red Pitaya too. You still need a Python 3 virtual > environment if your default python package is 2.7. > > 2) https://github.com/casper-astro/casperfpga - this should work with > SKARAB and Red Pitaya too (Python 2.7) > > 3) https://github.com/casper-astro/casperfpga/tree/py3-merge - this works > with SNAP, but I haven't tested it on SKARAB or the Red Pitaya. It may work > on the Red Pitaya, but I believe there are still issues with SKARAB (Python > 3) > > > > I hope this helps! > > > Kind regards, > > > > Adam Isaacson > > South African Radio Astronomy Observatory (SARAO) > > Hardware Manager > > Cell: (+27) 825639602 > > Tel: (+27) 215067300 > > email: aisaac...@ska.ac.za > > > > > > On Tue, Apr 13, 2021 at 4:36 PM 'Kobesky, Jeffrey CIV USN NRL (5555) > Washington DC (USA)' via casper@lists.berkeley.edu < > casper@lists.berkeley.edu> wrote: > > Hello CASPER, > > > > I’m installing tool flow and am confused about which python version to use > for casperfpga. I have both python 2.7 and 3.6 on my machine. > > > > For my equipment (red pitaya and skarab) this link > https://casper-toolflow.readthedocs.io/en/latest/ says to use python3. > But if I follow the steps in this link > https://casper-toolflow.readthedocs.io/en/latest/src/How-to-install-casperfpga.html > then casperfpga gets installed under the python 2.7 folder. > > > > This leads to errors (for example, I get error doing > “casperfpga._version_” in ipython), but I think I can clear those errors by > reconfiguring python versioning on my machine. > > > > For now, big picture questions are: Should we really be using python3 for > casperfpga with red pitaya and skarab? If so is there a script available > that would install casperfpga in the correct python3 folder? I’ve looked > in the email archives but can’t find answers. > > > > Thanks! -- Jeff > > > > Jeffrey Kobesky > > Electronics Engineer > > Naval Research Laboratory > > O: (202) 404-7109 > > M: (443) 243-1554 > > > > -- > You received this message because you are subscribed to the Google Groups " > casper@lists.berkeley.edu" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to casper+unsubscr...@lists.berkeley.edu. > To view this discussion on the web visit > https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/cfbc6d4fdd764eac96224b1df77016aa%40nrl.navy.mil > <https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/cfbc6d4fdd764eac96224b1df77016aa%40nrl.navy.mil?utm_medium=email&utm_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups " > casper@lists.berkeley.edu" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to casper+unsubscr...@lists.berkeley.edu. > To view this discussion on the web visit > https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/CADTJ%3DnHqgYbkB2eymR-Vf6k6Lsug-YS14TZfPYEMhZKBx-yMFw%40mail.gmail.com > <https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/CADTJ%3DnHqgYbkB2eymR-Vf6k6Lsug-YS14TZfPYEMhZKBx-yMFw%40mail.gmail.com?utm_medium=email&utm_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups " > casper@lists.berkeley.edu" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to casper+unsubscr...@lists.berkeley.edu. > To view this discussion on the web visit > https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/CAA1FmcVt_3MPVjKAkQYBX_24CsmiKfdxOc1eHFamgp6eBHg9tg%40mail.gmail.com > <https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/CAA1FmcVt_3MPVjKAkQYBX_24CsmiKfdxOc1eHFamgp6eBHg9tg%40mail.gmail.com?utm_medium=email&utm_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups " > casper@lists.berkeley.edu" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to casper+unsubscr...@lists.berkeley.edu. > To view this discussion on the web visit > https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/CANfrX%3D-6yyQmsucSQq1tBje1NK0-gW5UBBb-FcXopnEheUJV0A%40mail.gmail.com > <https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/CANfrX%3D-6yyQmsucSQq1tBje1NK0-gW5UBBb-FcXopnEheUJV0A%40mail.gmail.com?utm_medium=email&utm_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups " > casper@lists.berkeley.edu" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to casper+unsubscr...@lists.berkeley.edu. > To view this discussion on the web visit > https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/CAGH-0Ten_ArBh4sZFk3CORQ1%3DyjmN1sUDjTrFmD%2BqygWgpL-4g%40mail.gmail.com > <https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/CAGH-0Ten_ArBh4sZFk3CORQ1%3DyjmN1sUDjTrFmD%2BqygWgpL-4g%40mail.gmail.com?utm_medium=email&utm_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups " > casper@lists.berkeley.edu" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to casper+unsubscr...@lists.berkeley.edu. > To view this discussion on the web visit > https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/CADTJ%3DnFuovuKfhXyorBYBFoRmu3uaqX2WmUvbB6upwSJJO%2B5Gg%40mail.gmail.com > <https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/CADTJ%3DnFuovuKfhXyorBYBFoRmu3uaqX2WmUvbB6upwSJJO%2B5Gg%40mail.gmail.com?utm_medium=email&utm_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups " > casper@lists.berkeley.edu" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to casper+unsubscr...@lists.berkeley.edu. > To view this discussion on the web visit > https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/f7509c2d17ef42728a32cd8798f1760a%40nrl.navy.mil > <https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/f7509c2d17ef42728a32cd8798f1760a%40nrl.navy.mil?utm_medium=email&utm_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups " > casper@lists.berkeley.edu" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to casper+unsubscr...@lists.berkeley.edu. > To view this discussion on the web visit > https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/CADTJ%3DnEmwG2b%2BhLB1yzG1r2ozO3Wsu6y9-7ZeG9VgaiakLYkEw%40mail.gmail.com > <https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/CADTJ%3DnEmwG2b%2BhLB1yzG1r2ozO3Wsu6y9-7ZeG9VgaiakLYkEw%40mail.gmail.com?utm_medium=email&utm_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups " > casper@lists.berkeley.edu" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to casper+unsubscr...@lists.berkeley.edu. > To view this discussion on the web visit > https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/d9c0293ec0964faba1aed378bf0ba8c1%40nrl.navy.mil > <https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/d9c0293ec0964faba1aed378bf0ba8c1%40nrl.navy.mil?utm_medium=email&utm_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "casper@lists.berkeley.edu" group. To unsubscribe from this group and stop receiving emails from it, send an email to casper+unsubscr...@lists.berkeley.edu. To view this discussion on the web visit https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/CADTJ%3DnEx52o0ycO7a5g4fQY%2B-GaXOQ1kNV1DRGPjUtEO%3DQnzjQ%40mail.gmail.com.
