Hi Gonzalo, The problem is probably exactly what it's saying - the input signal is the wrong width for the slice, so it's trying to grab bits that don't exist. - Is the input data the expected width?
Possibly try running a short simulation and check out the bit widths of each signal - I'd guess that some part of the design has an incorrect parameter. Cheers, Jonathon On Tue, 12 Oct 2021 at 14:56, Gonzalo Burgos <[email protected]> wrote: > Hi everyone. > I hope you're keeping well. > I try to compile a design for roach2 (a spectrometer of 1024 channels, and > data read of the complex componentes of each channel). But casper_xps shows > me an error in a slice inside a bram. I attach the info of the > sysgen_error.log file and the screenshots of the error windows. > > --------------------------------- Version Log > ---------------------------------- > Version Path > System Generator /opt/Xilinx/14.7/ISE_DS/ISE/sysgen > Matlab 8.2.0.701 (R2013b) /usr/local/MATLAB/R2013b > ISE /opt/Xilinx/14.7/ISE_DS/ISE > > -------------------------------------------------------------------------------- > Summary of Errors: > Error 0001: Incorrect slice end point > Block: 'try2_1/pbc3/munge_in/split/slice2' > > -------------------------------------------------------------------------------- > Error 0001: > Reported by: > 'try2_1/pbc3/munge_in/split/slice2' > > Details: > Slice endpoints must lie between the LSB and MSB > Error occurred during "Rate and Type Error Checking". > > > -------------------------------------------------------------------------------- > Cheers. > > *PD: other spectrometer design don't have this problem and works well* > > -- > You received this message because you are subscribed to the Google Groups " > [email protected]" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/7b30cf61-740a-47f1-9af4-315bf43483f2n%40lists.berkeley.edu > <https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/7b30cf61-740a-47f1-9af4-315bf43483f2n%40lists.berkeley.edu?utm_medium=email&utm_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "[email protected]" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/CAPU71P-b3DyHjFmXYwj519LSvv91QdrqfgNy_Wszs77qcw%2BQ3Q%40mail.gmail.com.
