Hi CASPER，
I failed to run the bof file. Here are the details:
1）I have 7 ROACH2s, 6（netboot） of which ran the bof file successfully and
the seventh（soloboot） failed.
2）Seventh (failed), can run other bof files.
?progdev roach2_MAC_wz.bof
#log info 1206015602753 raw attempting\_to\_program\_roach2_MAC_wz.bof
#log info 1206015602760 raw
attempting\_to\_program\_bitstream\_of\_19586188\_bytes\_to\_device\_/dev/roach/c
onfig
#log error 1206015603034 raw write\_to\_fpga\_failed:\_Success
#log error 1206015603037 raw
unable\_to\_program\_bit\_stream\_to\_/dev/roach/config
#log error 1206015603037 raw
unable\_to\_program\_bit\_stream\_from\_roach2_MAC_wz.bof
!progdev fail
?progdev roach2_MAC.bof
#log info 1206016122388 raw attempting\_to\_program\_roach2_MAC.bof
#log info 1206016122394 raw
attempting\_to\_program\_bitstream\_of\_19586188\_bytes\_to\_device\_/dev/roach/config
#fpga loaded
#fpga ready
!progdev ok
3）On failure, the 7th ROACH2 terminal outputs the following message:
/dev/roach # roach VMA close
roach release mem calledroach open config called
rdev gpio preconfig doneProgrammed fpga device id = 04288093
request to write 1740 was not a multiple of 4, only writing 1743request to
write 0 was not a3
roach release config called
4）This information should be helpful:
/dev/roach # ls
config mem
/dev/roach # cat config
roach open config called
rdev gpio preconfig donecat: read error:roach release config called Invalid
argument
/dev/roach #
Does anyone have any experience in solving this problem?
BW！
Wang
--
You received this message because you are subscribed to the Google Groups
"[email protected]" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/102ddea9-28dd-4586-998e-034b3fca9cedn%40lists.berkeley.edu.
