Hi，CASPER I know what the problem is.
~ # mount -t nfs -o nolock 192.168.25.101:/srv/roach_boot/etch/boffiles /mnt ~ # cp /mnt/roach2_fengine_led.bof /boffiles/ cp: can't create '/boffiles/roach2_MAC_wz.bof': No space left on device BW， Wang Wang <sandang19990...@gmail.com> 于2023年4月22日周六 11:21写道： > Hi CASPER， > I failed to run the bof file. Here are the details: > > 1）I have 7 ROACH2s, 6（netboot） of which ran the bof file successfully and > the seventh（soloboot） failed. > > 2）Seventh (failed), can run other bof files. > ?progdev roach2_MAC_wz.bof > #log info 1206015602753 raw attempting\_to\_program\_roach2_MAC_wz.bof > #log info 1206015602760 raw > attempting\_to\_program\_bitstream\_of\_19586188\_bytes\_to\_device\_/dev/roach/c > onfig > #log error 1206015603034 raw write\_to\_fpga\_failed:\_Success > #log error 1206015603037 raw > unable\_to\_program\_bit\_stream\_to\_/dev/roach/config > #log error 1206015603037 raw > unable\_to\_program\_bit\_stream\_from\_roach2_MAC_wz.bof > !progdev fail > ?progdev roach2_MAC.bof > #log info 1206016122388 raw attempting\_to\_program\_roach2_MAC.bof > #log info 1206016122394 raw > attempting\_to\_program\_bitstream\_of\_19586188\_bytes\_to\_device\_/dev/roach/config > #fpga loaded > #fpga ready > !progdev ok > > 3）On failure, the 7th ROACH2 terminal outputs the following message: > /dev/roach # roach VMA close > > roach release mem calledroach open config called > > rdev gpio preconfig doneProgrammed fpga device id = 04288093 > > request to write 1740 was not a multiple of 4, only writing 1743request to > write 0 was not a3 > roach release config called > > 4）This information should be helpful: > /dev/roach # ls > > config mem > > /dev/roach # cat config > > roach open config called > > rdev gpio preconfig donecat: read error:roach release config called > Invalid argument > /dev/roach # > > Does anyone have any experience in solving this problem? > > BW！ > Wang > > > > > > > > > -- > You received this message because you are subscribed to the Google Groups " > casper@lists.berkeley.edu" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to casper+unsubscr...@lists.berkeley.edu. > To view this discussion on the web visit > https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/102ddea9-28dd-4586-998e-034b3fca9cedn%40lists.berkeley.edu > <https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/102ddea9-28dd-4586-998e-034b3fca9cedn%40lists.berkeley.edu?utm_medium=email&utm_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "casper@lists.berkeley.edu" group. To unsubscribe from this group and stop receiving emails from it, send an email to casper+unsubscr...@lists.berkeley.edu. To view this discussion on the web visit https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/CAEq%3DE3FWdmtNivF72oG7Om%3DSK1tDCz1CLANfZtDZHSu7B2FQjw%40mail.gmail.com.
