For those who may be following this thread and who may be familiar with
the vinyl insert rub rail coming out of the track usually due to
healing and putting the rub rail under water, you can use Gorilla glue
to glue this back and it appears to hold quite well. We tried Gorilla
glue for this three years ago under a section on the starboard side
that continually popped out of the track. It hasn't popped out since.
Dave Hoy
WYANOKEE #6295
Camden, Maine
James Calleran wrote:
Mike,
I'm assuming you are referring to replacing the vinyl insert of the
rub rail not the entire aluminum extrusion. (I don't recall seeing
anything but the vinyl inserts on Catalina Direct.)
The vinyl on my boat was so bad when I bought it that I decided to
replace it rather than trying to clean it. I ordered mine directly
from the Catalina factory, but it the same difference regardless. My
boat was on the hard at the time.
As the insert comes in a coil, I would unroll it and lay it out in
the sun for a few minutes to soften and increase its flexibility.
After that, putting it in is pretty straight forward. Starting in the
middle of the transom, I would hook about 12 inches or so of the upper
edge in the rub rail track then push the lower edge upward until it
locked into the track. Then I just worked my way around the boat until
I got back to where I started. Having a helper to hold up the length
of vinyl helps; it take the weight off the insert and helps to prevent
the insert you've just inserted from pulling out.
All in all It was a pretty easy job. BTW, I used the tan
(teak-looking?) vinyl, but it comes in gray as well.
Fair winds,
Jim Calleran, BayBird, C27 #2784
Mathews Yacht Club, VA (37°27.8' N / 76°18.6' W)
http://www.mathewsyachtclub.com/
[EMAIL PROTECTED] wrote:
Has
anyone out there removed and installed a new rub/rail? my 1975 C-27 is
in dire need of a new one and Catalina Direct has them. Just wondering
what kind of a job it really is. Thanks in advance, Mike.
Yahoo! Messenger with Voice. Make
PC-to-Phone Calls to the US (and 30+ countries) for 2¢/min or less.
|
- Re: catalina27-talk: rub rail DHoy
-