If the question did not say that you can not apply a percent to the default class I would go with that. It sounds to me like they are telling you to allocate the remaining bandwidth percent to class-default.
From: [email protected] [mailto:[email protected]] On Behalf Of M Jay Sent: Wednesday, August 12, 2009 11:55 AM To: IP expert Subject: [OSL | CCIE_RS] QoS Hey Experts where are you guys ??? Bryan, Larry, Tyson or any one ???? no buddy knows the answer ??? please if any one can explain this to me ..... A question regarding QoS: Confugure QoS to corresponding interface. Subscriber's ip address and bandwidth are as follows : * SUB_1 : 100.100.0/24 bandwidth 20% * SUB_2 : 100.100. 2.0/24 bandwidth 30% * Voice : Critical voice traffic bandwidth 40% * Class-default : Class-default for remaining bandwidth I just need to ask what bandwidth I allocate to Class-Default ? Should I just assign it as fair-queue or need to assign bandwidth of 10 % which is the remaining bandwidth under policy map: policy-map CBWFQ class class-default bandwidth percent 10 or policy-map CBWFQ class class-default fair-queue and what % bandwidth I need to allocate to the interface Interface X max-reserved-bandwidth 90 or Interface X max-reserved-bandwidth 100 Plz assist Thanks ________________________________ Express your personality in color! Preview and select themes for Hotmail(r). Try it now.<http://www.windowslive-hotmail.com/LearnMore/personalize.aspx?ocid=PID23391::T:WLMTAGL:ON:WL:en-US:WM_HYGN_express:082009>
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
