Hello M Jay, Not sure I understand the question. If you are not given a value for class-default then I would not put one. If you are told to give it the remaining then you can use subtract the others as you have done to get 10. What Lab/Volume task is this from?
On Wed, Aug 12, 2009 at 12:55 PM, M Jay <[email protected]> wrote: > Hey Experts where are you guys ??? Bryan, Larry, Tyson or any one ???? no > buddy knows the answer ??? please if any one can explain this to me ..... > > A question regarding QoS: > > Confugure QoS to corresponding interface. Subscriber’s ip address and > bandwidth are as follows : > · SUB_1 : 100.100.0/24 bandwidth 20% > · SUB_2 : 100.100. 2.0/24 bandwidth 30% > · Voice : Critical voice traffic bandwidth 40% > ·* Class-default : Class-default for remaining bandwidth* > > > I just need to ask what bandwidth I allocate to Class-Default ? Should I > just assign it as *fair-queue* or need to assign bandwidth of 10 % which > is the remaining bandwidth > > under policy map: > > policy-map CBWFQ > class class-default > *bandwidth percent 10* > > or > > policy-map CBWFQ > class class-default > *fair-queue* > > and what *% bandwidth *I need to allocate to the interface > > > Interface X > max-reserved-bandwidth 90 > > or > > Interface X > max-reserved-bandwidth 100 > > > Plz assist > > Thanks > > > > > > ------------------------------ > Express your personality in color! Preview and select themes for Hotmail®. Try > it > now.<http://www.windowslive-hotmail.com/LearnMore/personalize.aspx?ocid=PID23391::T:WLMTAGL:ON:WL:en-US:WM_HYGN_express:082009> > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > -- Bryan Bartik CCIE #23707 (R&S), CCNP Sr. Support Engineer - IPexpert, Inc. URL: http://www.IPexpert.com
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
