Re: [OSL | CCIE_Security] IPS Sensor inter vlan pair mode with vlans in different subnet

[Stuart Hare]

Kings

This is where u would use inline interface pairs instead of vlan  
pairs. Set up the switchports as access to ur respective  vlans and  
assign both of the interfaces to a single inline pair.

Hth
Stu

Sent from my iPhone

On 29 Aug 2009, at 10:14, Kingsley Charles  
<kingsley.char...@gmail.com> wrote:

Hi all

IPS Sensor supports inter vlan pair mode with interface in the  
trunking mode. The sensor actually bridges i.e., swaps the vlan id  
of the incoming frame. Here, should both VLANs should be in same  
subnet.
Can the VLAN be in different subnets?

VLAN A - 10.20.30.0/24

VLAN B - 10.30.20.0/24

Can the sensor's interface be configured in inline vlan pair mode  
between vlan A and B?


With regards
Kings
_______________________________________________
For more information regarding industry leading CCIE Lab training,  
please visit www.ipexpert.com
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com