Kings, Ignore this respone I misread your mail.
As far as I am aware, this wouldnt work using the IPS alone as it doesnt do any routing across it interface or vlan pairs. As Tyson has mentioned also, Im not sure how you would retain IP reachability. Stu 2009/8/29 Stuart Hare <[email protected]> > Kings > > This is where u would use inline interface pairs instead of vlan pairs. Set > up the switchports as access to ur respective vlans and assign both of the > interfaces to a single inline pair. > > Hth > Stu > > Sent from my iPhone > > On 29 Aug 2009, at 10:14, Kingsley Charles <[email protected]> > wrote: > > Hi all > > IPS Sensor supports inter vlan pair mode with interface in the trunking > mode. The sensor actually bridges i.e., swaps the vlan id of the incoming > frame. Here, should both VLANs should be in same subnet. > > Can the VLAN be in different subnets? > > VLAN A - 10.20.30.0/24 > > VLAN B - 10.30.20.0/24 > Can the sensor's interface be configured in inline vlan pair mode between > vlan A and B? > > > With regards > Kings > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
