Usually, ASA will be sitting in between KS and GM and ASA supports only PIM SM.
With regards Kings On Wed, Sep 28, 2011 at 6:33 PM, Diego Cambronero < [email protected]> wrote: > In the exam we can use ip pim dense-mode right? Just enable multicast > routing and ip pim dense-mode in both interfaces of r2 that is it. > > > > El 28/09/2011, a las 01:08 a.m., Kingsley Charles < > [email protected]> escribió: > > Hi all > > When I ping from R3 to 239.1.2.3, I don't get replies from R1. > > When I configure "ip igmp join-group 239.1.2.3" on R1's G0/1 that is > connected to R2, I get two replies. > > > > 10.20.30.41 20.10.30.42 > L0 R1 ------------------------------ R2 > --------------------------------- R3 > 1.1.1.1 10.20.30.42 > 20.10.30.43 > > > *R1 Config* > > > ip multicast-routing > > ip pim rp-address 10.20.30.42 > > interface Loopback0 > ip address 1.1.1.1 255.255.255.0 > ip pim sparse-mode > ip igmp join-group 239.1.2.3 > > interface GigabitEthernet0/1 > ip address 10.20.30.41 255.255.255.0 > ip pim sparse-mode > > > > *R2 Config* > > ip multicast-routing > > ip pim rp-address 10.20.30.42 > > interface GigabitEthernet0/0 > ip address 20.10.30.42 255.255.255.0 > ip pim sparse-mode > duplex auto > speed auto > ! > interface GigabitEthernet0/1 > ip address 10.20.30.42 255.255.255.0 > ip pim sparse-mode > duplex auto > speed auto > > > *R3 Config* > > > ip route 10.20.30.0 255.255.255.0 10.20.30.42 > > ip multicast-routing > > ip pim rp-address 10.20.30.42 > > interface GigabitEthernet0/0 > ip address 20.10.30.43 255.255.255.0 > ip pim sparse-mode > duplex auto > speed auto > > > With regards > Kings > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit <http://www.ipexpert.com>www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > <http://www.PlatinumPlacement.com>www.PlatinumPlacement.com > >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
