There is no ASA in the topology given below...

But usually, the ASA will be configured for multicasting routing and PIM SP.
The PIM RP address will be the KS?


With regards
Kings

On Wed, Sep 28, 2011 at 7:42 PM, Diego Cambronero <
[email protected]> wrote:

> How did you configure the ASA ?
>
>
>
> El 28/09/2011, a las 06:55 a.m., Kingsley Charles <
> [email protected]> escribió:
>
> Usually, ASA will be sitting in between KS and GM and ASA supports only PIM
> SM.
>
>
> With regards
> Kings
>
> On Wed, Sep 28, 2011 at 6:33 PM, Diego Cambronero 
> <<[email protected]>
> [email protected]> wrote:
>
>> In the exam we can use ip pim dense-mode right? Just enable multicast
>> routing and ip pim dense-mode in both interfaces of r2 that is it.
>>
>>
>>
>> El 28/09/2011, a las 01:08 a.m., Kingsley Charles 
>> <<[email protected]>
>> [email protected]> escribió:
>>
>> Hi all
>>
>> When I ping from R3 to 239.1.2.3, I don't get replies from R1.
>>
>> When I configure "ip igmp join-group 239.1.2.3" on R1's G0/1 that is
>> connected to R2, I get two replies.
>>
>>
>>
>>         10.20.30.41                        20.10.30.42
>>        L0 R1 ------------------------------ R2
>> --------------------------------- R3
>> 1.1.1.1                    10.20.30.42
>> 20.10.30.43
>>
>>
>> *R1 Config*
>>
>>
>> ip multicast-routing
>>
>> ip pim rp-address 10.20.30.42
>>
>> interface Loopback0
>>  ip address 1.1.1.1 255.255.255.0
>>  ip pim sparse-mode
>>  ip igmp join-group 239.1.2.3
>>
>> interface GigabitEthernet0/1
>>  ip address 10.20.30.41 255.255.255.0
>>  ip pim sparse-mode
>>
>>
>>
>> *R2 Config*
>>
>> ip multicast-routing
>>
>> ip pim rp-address 10.20.30.42
>>
>> interface GigabitEthernet0/0
>>  ip address 20.10.30.42 255.255.255.0
>>  ip pim sparse-mode
>>  duplex auto
>>  speed auto
>> !
>> interface GigabitEthernet0/1
>>  ip address 10.20.30.42 255.255.255.0
>>  ip pim sparse-mode
>>  duplex auto
>>  speed auto
>>
>>
>> *R3 Config*
>>
>>
>> ip route 10.20.30.0 255.255.255.0 10.20.30.42
>>
>> ip multicast-routing
>>
>> ip pim rp-address 10.20.30.42
>>
>> interface GigabitEthernet0/0
>>  ip address 20.10.30.43 255.255.255.0
>>  ip pim sparse-mode
>>  duplex auto
>>  speed auto
>>
>>
>> With regards
>> Kings
>>
>> _______________________________________________
>> For more information regarding industry leading CCIE Lab training, please
>> visit <http://www.ipexpert.com> <http://www.ipexpert.com>www.ipexpert.com
>>
>> Are you a CCNP or CCIE and looking for a job? Check out
>> <http://www.PlatinumPlacement.com> <http://www.PlatinumPlacement.com>
>> www.PlatinumPlacement.com
>>
>>
>
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Reply via email to