How did you configure the ASA ?
El 28/09/2011, a las 06:55 a.m., Kingsley Charles <[email protected]> escribió: > Usually, ASA will be sitting in between KS and GM and ASA supports only PIM > SM. > > > With regards > Kings > > On Wed, Sep 28, 2011 at 6:33 PM, Diego Cambronero > <[email protected]> wrote: > In the exam we can use ip pim dense-mode right? Just enable multicast routing > and ip pim dense-mode in both interfaces of r2 that is it. > > > > El 28/09/2011, a las 01:08 a.m., Kingsley Charles > <[email protected]> escribió: > >> Hi all >> >> When I ping from R3 to 239.1.2.3, I don't get replies from R1. >> >> When I configure "ip igmp join-group 239.1.2.3" on R1's G0/1 that is >> connected to R2, I get two replies. >> >> >> >> 10.20.30.41 20.10.30.42 >> L0 R1 ------------------------------ R2 >> --------------------------------- R3 >> 1.1.1.1 10.20.30.42 >> 20.10.30.43 >> >> >> R1 Config >> >> >> ip multicast-routing >> >> ip pim rp-address 10.20.30.42 >> >> interface Loopback0 >> ip address 1.1.1.1 255.255.255.0 >> ip pim sparse-mode >> ip igmp join-group 239.1.2.3 >> >> interface GigabitEthernet0/1 >> ip address 10.20.30.41 255.255.255.0 >> ip pim sparse-mode >> >> >> >> R2 Config >> >> ip multicast-routing >> >> ip pim rp-address 10.20.30.42 >> >> interface GigabitEthernet0/0 >> ip address 20.10.30.42 255.255.255.0 >> ip pim sparse-mode >> duplex auto >> speed auto >> ! >> interface GigabitEthernet0/1 >> ip address 10.20.30.42 255.255.255.0 >> ip pim sparse-mode >> duplex auto >> speed auto >> >> >> R3 Config >> >> >> ip route 10.20.30.0 255.255.255.0 10.20.30.42 >> >> ip multicast-routing >> >> ip pim rp-address 10.20.30.42 >> >> interface GigabitEthernet0/0 >> ip address 20.10.30.43 255.255.255.0 >> ip pim sparse-mode >> duplex auto >> speed auto >> >> >> With regards >> Kings >> _______________________________________________ >> For more information regarding industry leading CCIE Lab training, please >> visit www.ipexpert.com >> >> Are you a CCNP or CCIE and looking for a job? Check out >> www.PlatinumPlacement.com >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
