Kings, All you listed is good. I'd add "show run | in access-list" too to that list
All the best Mark CCIE #30234 (Security) On 12/21/11, Andrey Klyuchka <[email protected]> wrote: > Kings, > > I would have done only part with sh access-list like Piotr noted and also > copied configs to the desktop. > In the finish I would coded script in notepad with things like this: > > no debug all > no logging con > etc > > That's all, I actually did so. 2 times ) > Good luck! > > Best regards, > Andrey > > -- > Andrey Klyuchka :: CCIE #30274 (Security) > Twitter: http://twitter.com/bitstriker > LinkedIn: http://kz.linkedin.com/in/andreyklyuchka > > > > On Dec 21, 2011, at 11:27 AM, Kingsley Charles wrote: > >> Hi all >> >> I will be performing the following checks before starting my lab that >> would be helpful for troubleshooting: >> >> Router >> >> sh run | in ip access-group >> sh run | in ip local >> sh run | in ip policy >> sh run | in service-policy >> >> Switch >> >> sh run | in ip access-group >> sh run | in vlan filter >> >> >> Please provide your comments. >> >> >> With regards >> Kings >> _______________________________________________ >> For more information regarding industry leading CCIE Lab training, please >> visit www.ipexpert.com >> >> Are you a CCNP or CCIE and looking for a job? Check out >> www.PlatinumPlacement.com > > _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
