No problem and glad to help out. I do have both types of ASA's running on my laptop so if you still have issues just let me know and I will do my best to help out. I was pretty lucky with the ASA's in that I don't recall any issues. However the IPS gave me some major problems and for awhile I thought I would never get it to work....
James On Mon, Jul 22, 2013 at 4:08 PM, Mulholland, Michael (DFP) < [email protected]> wrote: > folks**** > > ** ** > > i can’t get the asa to load, it just keeps reloading with a directory error > **** > > ** ** > > i’ve uninstalled and reinstalled gns3 (both standalone and all-in-one) and > used the settings advised**** > > ** ** > > i’ll try again in a day or two**** > > ** ** > > james,**** > > ** ** > > thanks for taking the time to respond to our queries**** > > ** ** > > greatly appreciated**** > > ** ** > > *From:* [email protected] [mailto: > [email protected]] *On Behalf Of *James > Keddington II > *Sent:* 22 July 2013 22:15 > *To:* [email protected] > *Subject:* Re: [OSL | CCIE_Security] gns3 and windows 7**** > > ** ** > > Hello Adil,**** > > So to be honest I didn't actually define a second ASA in Qemu, I just > added it to the map. Both ASA's work great so I personally I don't think > you should have an issue getting all 4 up and running. I also used the same > activation-key for both of my firewalls. ASA1 and ASA2 in my diagram are > running 8.0.2...**** > > James**** > > ** ** > > On Mon, Jul 22, 2013 at 12:19 AM, Adil Pasha <[email protected]> wrote:*** > * > > Hello James,**** > > I created 1 ASA 8.4 successfully. But when I used the following config for > second ASA the console does not come up.**** > > *Qemu Options:* -vnc :2 none -vga none -m 1024 -icount auto -hdachs > 980,16,32**** > > ** ** > > I also wanted to create 4 ASAs as in the new lab.**** > > ** ** > > Thanks for your help in advance.**** > > ** ** > > Best Regards.**** > > ______________________**** > > Adil S Pasha**** > > ** ** > > ** ** > > On Jul 21, 2013, at 6:58 PM, James K Keddington II <[email protected]> > wrote:**** > > ** ** > > I used this link to get the ASA running 8.4 working in GNS3 running on Win > 7 x64:**** > > **** > > http://www.xerunetworks.com/2012/02/cisco-asa-84-on-gns3/**** > > **** > > I haven’t taken the time to get IOS 15.x running because I am not sure > what the performance hit is going to be since the only router in GNS3 that > supports it is a 7206 VXR…**** > > **** > > Here is what my lab looks like in GNS3. I have a VM of WSA but haven’t > added it yet because I still need to get a valid license which I am hoping > will be soon…**** > > **** > > James**** > > **** > > *From:* [email protected] [mailto:ccie_security- > [email protected]] *On Behalf Of *Mulholland, Michael (DFP) > *Sent:* Sunday, July 21, 2013 3:18 PM > *To:* [email protected] > *Subject:* [OSL | CCIE_Security] gns3 and windows 7**** > > **** > > folks**** > > **** > > has anyone successfully set up a lab in gns3 using asa 8.4 and ios 15.1 in > windows 7**** > > **** > > if so, can you share the instructions please?**** > > **** > > thanks**** > ------------------------------ > > No virus found in this message. > Checked by AVG - www.avg.com > Version: 2013.0.3349 / Virus Database: 3204/6507 - Release Date: 07/20/13* > *** > > <IPxpert CCIE ver4 lab.jpg>_______________________________________________ > **** > > > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com**** > > ** ** > > ** ** >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
