Hello Otto,

Yes requirement is to transport g729 over the WAN

if i want to transcoder on the trunk.

What do i need to do because quetion says use the hq resources


The last time i applied the transcoder to the trunk,

When hq phone call the sip phone on br2, i get a reorder tone

When the sip phone on the br2 calls the hq phone, it disconnects on pick up
and continues to ring on the sip phone

Thanks

On Fri, Mar 12, 2010 at 8:37 PM, Otto Sanchez <o...@ipexpert.com> wrote:

> Hi,
>
> You want to transcode at the br2 rtr as I suppose your requirement is to
> transport the call using g.729 over the wan right?, if that's the case, make
> sure the incoming dial-peer codec is set to g.729, in that case the
> transcoder at br2 shoud be invoked if the sip phone codec is set to g.711,
>
>
>
> On Fri, Mar 12, 2010 at 10:03 AM, Omotayo <adefilabi...@gmail.com> wrote:
>
>> Hello Otto,
>>
>> i had same issue
>>
>> The transcoder can be on the trunk?
>>
>> When i did the transcoder on the br2 router, i get a busy tone when the
>> sip phone is being called from the hq phone
>>
>> REgards
>>
>>   On Fri, Mar 12, 2010 at 12:59 PM, Otto Sanchez <o...@ipexpert.com>wrote:
>>
>>> Hi Jeff,
>>>
>>> Would you please tell us more about the call flow and the end to end
>>> codec requirements for this call. If doing g.729 over the wan, and your sip
>>> phone is using g.711 you should transcode at br2,
>>>
>>> Please let us know,
>>>
>>> Thanks,
>>>
>>>  On Thu, Mar 11, 2010 at 8:29 PM, Jeff Cotter <jcot...@voxns.com> wrote:
>>>
>>>>   Can anybody tell me if a PVDM2-32 can be used as a hardware
>>>> transcoder on UCM.  Can’t seem to get a call from Call Manager to CME sip
>>>> phone working.  I can call from CME to UCM but not the other way around.
>>>> Rings but disconnects when answered.  Transcoder shows registered in Call
>>>> manager.  Thanks
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> Jeff
>>>>
>>>> _______________________________________________
>>>> For more information regarding industry leading CCIE Lab training,
>>>> please visit www.ipexpert.com
>>>>
>>>>
>>>
>>>
>>> --
>>> Regards,
>>>
>>> Otto Sanchez
>>> CCIE #25592 (Voice)
>>> Support Engineer - IPexpert, Inc.
>>> URL: http://www.IPexpert.com <http://www.ipexpert.com/>
>>>
>>> _______________________________________________
>>> For more information regarding industry leading CCIE Lab training, please
>>> visit www.ipexpert.com
>>>
>>>
>>
>
>
> --
> Regards,
>
> Otto Sanchez
> CCIE #25592 (Voice)
> Support Engineer - IPexpert, Inc.
> URL: http://www.IPexpert.com <http://www.ipexpert.com/>
>
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Reply via email to